BLUE PRINTING MIKUNI 28MM RACE CARB

I WILL POLISH THIS CARB INSIDE AND OUTSIDE TO SUPER-BLING. THis video series will take us from rough cast mikuni to Full Race Never Lose Mikuni carb

Category:

Autos & Vehicles

Tags:

• Mikuni.duplicolor
• paint
• painting
• metallic
• clear
• coat
• how
• to
• motorcycle
• 1983
• 1984
• Hondamatic
• 450
• CMA
• starter
• problems
• vintage
• bike
• solenoid
• PHONGEER
• Port
• map
• Porting
• anylizer
• stroker
• moped
• scooter
• racing
• tuning
• honda
• dio
• elite
• 50cc
• engine
• high
• performance
• yamaha
• aerox
• aprilia
• vision
• 114cc
• 120cc
• 98cc
• 80cc
• 85cc
• two
• stroke
• race
• RS50
• water
• cooled
• cylinder
• big
• bore
• vtcycles
• hawaii
• speed
• fast
• rocket
• motorcycle.
• polish
• venturi

[KuceenC]

English isn't my first language, so if you didn't understand, let me know and  I could try to do it better.

[DIOSpeedDemon]

Your English is fine. My books tell me exactly what you pointed out, but I want to try it anyway because I am bored with a long winter ahead in America. That is good advice and I thank you for it. RH DSD

[warezvz]

hm... dont want to insult you but i have a lot experiance with scoots, but the polishing of a carb is not use to anything else then wearing down the metal and scratching it and this leads to removing the optimal mixture of 14.7:1 to 15 or more. So its no use. Also polishing it wont do any good on puting the friction down because this metal has fine pores that dont alove the fluid and air to do friction on it and if polishing them you are adding friction to it.

[DIOSpeedDemon]

@warezvz It could not hurt either and I have always wanted to give it a try, so it is winter and I am going to play with it. Good advice as usual. DSD

[2F4R]

it's a mikuni flat slide carb, TM series, the round slide is called the VM series.

[DIOSpeedDemon]

@2F4R You are right as always. Good to have a friend with so much knowledge. REspect= RH DSD

[MrSnowplow420]

" that was a small mistake we won't look at that to much ,that i fixed that and i don't really want to talk about it." haha , like watching the vids keep it up

[wildmandazza]

I really enjoyed this video very informative and realistic-thank you for posting .

[MrJayball]

maybe u could help me, i have a pw 80 dirtbike carb an no matter how i adjust the float gas pores out.when i push up the float by hand an blow in the gas line the air stops. is there any specs to set the float at.thanks

[KuceenC]

Well weather here in Latvia sucks too in winter time. Cant ride from like October till end of the March or beginning of April. So I think Ill do something to my scoot too...

[KuceenC]

as much as I know polishing intake parts is not a good idea. As the pores it he metal create little vortexes and helps fuel mixing with air and prevents big vortexes at places where the channels bend... You can smoothen the edges and align all channels better, but don't polish it to a mirror shine.