For More info, The Description is here
The First Demonstration is, at the neutral position, the centre of gravity is located. So In this way, it is easy to rotate than lift it up because, to lift up, we need more power than to rotate it.
But in the Second Demonstration, the centre of gravity is not in the neutral position but the centre is shifted little longer from there. So In this way, it is hard to rotate than lift it up because of the additional distance and the force According to The Torque Principle
&
The Third Demonstration is, about the function of the device.
We need far more power to rotate the load (dumbbells) with two motors instead of the two dynamos, than the power to rotate the load (the load are wires, Bar, shaft, two dynamos, dumbbells) with the single motor at the neutral position as it shown in The First Demonstration.
And in reality, instead of the two motors, the two dynamos are in that place, to produce the electricity.
The hanging load (50 %) of the two dynamos & the Accessory (wires (1%), bar (4 %), shaft (3%), (sprockets 2%), two dynamos (20% each)] together the total weights are 100% at the neutral position of the bar to the metal poles but these weights have to be considered as a load for the single motor. So the single motor can be used as it demonstrated in The First Demonstration.
For Eg: The hanging load of the two dynamos is 7 kg & Accessory (wires, Bar, shaft, two dynamos are 3 kg) together 10 kg at the neutral position. Approximately, we need 10 kg power/ force to lift the 10 kg weight but we need only 6 kg converted electricity power to rotate smoothly the 10 kg load at the neutral position with the motor or if we increase the moment arm distance and reduce the 7 Kg load into 4 Kg, within the vertical angle 85° - 95°, without the crank action of the Device
(According to The Torque Principle http://www.youtube.com/watch?v=QhuJn8YBtmg ). So 7kg - 6kg = 1 kg,
& The 1kg - (500g for additional lost Energy as the heat of the dynamos, sound, etc) = 500g converted into electricity power as Free Energy. (Repeatedly, just for one second estimation)
&
Have a look at this Ferris wheel and think about the principle, we will find some similarity http://en.wikipedia.org/wiki/Ferris_wheel
(Note: This Video is for simple demonstration; otherwise the two dynamos & the hanging load have to be balanced properly)
&
I know such a device or system would not be in violation of the law of conservation of energy. Why? we never get anything from nothing. So we never create energy or destroy energy. So here, the source of energy is Gravitation.
If we are getting the energy from all most nothing then some one is controlling everything by law so the Perpetual motion device (such as this) also governed by that some one, The Almighty, The God for us.
By God everything is possible like this, including This Free energy (The Device). The God is The Power (The Law giver of Gravitation). If you want to know the truth, pray to know the truth if it is necessary.
Thanks
Useful information
http://en.wikipedia.org/wiki/Free_Energy_Device http://www.youtube.com/watch?v=BNDIWY19gqA
Truly, The Remarkable Possibility For The Free Energy (Device) - Part 2
http://www.youtube.com/watch?v=g8fMgM7-m4Q
Loading...
Very interesting
albinoduck51 3 years ago
Interesting...Too bad I didn't finish waching:)
hyperdude144 3 years ago