My 3 penny SEC experiment.ASF

This is a SEC 15-3 experiment where I show a three plate coupling between the SEC oscillator and two different loads. I use three US pennies for the plates. One load is a small pulse motor and the other is six LEDs in series. The feed to the loads is by way of AV plugs. The three plates do not touch each other.

Category:

Science & Technology

Tags:

• SEC 15-3
• Dr. Stiffler
• energy
• electronics

[bytesilver]

I think I have an explanation to this. (i could be 100% wrong)

The reason why the amp draw goes down is because the pennies are CLOSER and making a more efficient "capacitor coupling" . when you remove the middle penny, it requires more current to flow through the empty space and therefore the motor turns slower and the ampdraw goes up.

How about using GOLD RING ?!?!... see what happens there. My guess is the ampdraw will go down even more.

[Lidmotor]

@bytesilver ------Thanks. Several people have mentioned that adding the middle penny makes the coupling more efficient-----but no one is talking about the extra six LEDs that are getting lit up full brightness. Those six LEDs are in series. Each LED takes about 20mA and around 2.5 volts to light up. Where is THAT extra energy coming from when the amp draw goes down and he motor speeds up???? Hummm.

[zebok3]

Maybe the third penny cools off like Stiffler's SC transister. The opposite effect a conductor would have if normal current were used.

[Lidmotor]

@zebok3 ----I need to get a laser IR thermometer to measure the heat at the different points like Dr. Stiffler is doing now. If I locate a "cold" spot somewhere that could be a very important find.

[Inquorate]

Wow, so much misunderstanding in these comments. Loved it Lid.

[Lidmotor]

@Inquorate ------Thanks. Well if this draws attention to Dr. Stiffeer's SEC research then it doesn't matter if people understand it or not. Heck I don't really understand it. There may come a day when people just use it like a cell phone, take it for granted, and don't really care about how it works---just that it works.

[stjohnusvimusic]

I have been following you for years..Thankyou. re yr 3 penny video: very exciting.

Please follow up on this anomaly that you showed. Add several bank of leds and see if the effect keeps multiplying. something very weird seems to be going on and deserves more experimentation.

I also saw resently, I believed on lasersaber's site where he showed a coil that seemed to defy lenz law and produced power under load but speed up the pulse motor he was using to generate the power from the coil. replicat

[bytesilver]

@Lidmotor : Thnks 4 replying. (Im a huge fan of your videos/experiments)

Intriguing indeed :) thats what keeps me coming back watching these videos!!! Although isn't the SEC transmitting high voltage at low amperage like a crystal radio? If so that would explain why you get the LED's to light up in series.

- 6 x 2.5 volts in series = 15 volts @ 20mah

- 6 x 2.5 volts in parallel = 2.5 volts @ 120mah

can you power the same LED's in parallel? does the motor still speed up, or slow down?

[DadHav]

Brill. Absolutely brill old chap!

John

[UrCoffeeTastesToasty]

Your penny capacitor is bigger when you take away the leds and you are loading more negative energy/ negative time thus as observer you get more output. Nice finding.

JP

[Lupinlethird]

dr stiffler did show something similar in the time of his previous account;

with 2 short and one longer copper pipes like this

(___(====(___(o)

with all the specifics around it

who ever has this plz reseed such