floor sanding vid
Loading...
Uploader Comments (tankhamer)
All Comments (29)
-
@boscoesarmy or ignite the dust in the bag :)
@tankhamer Where are you located? Don't u have ready water based gap filler? It dries in 10-15 min. And you should get the bigger sander. I'm using a 12' Galaxy and doing only one angle with 36 grid paper and then along the boards before edging.
@Bdiddly1 maximum 5h with polishing and breaks for cigarette :)
-
ATTENTION- Always sink any floor nails with a nail punch before using a sanding machine. Most fllors now are tongue and groove with hidden nails in the groove of the floor. In many older floors the nails are visible and need to be recessed before sanding. The sparks you see at 33-35 seconds is the sander hitting off the nails. At the least they will rip the sandpaper and at worst ruin the machine.
-
what an old machine. My company use new Bona belt sanders connected to a Bona DCS Extraction unit.
-
@winger1123 'get a new machine this thing looks like shit'...
y dont u get a life, the guys done a good job
-
Thanks for posting. I was sanding a very old floor
and the sand paper kept ripping off the machine, any ideas why? Is was a rental, cheers.
-
I made a floor polisher into a floor sander by attaching sanding discs to the buffing pads, after pulling out all the tufts. Then attached my Dyson vacuum cleaner to it marvellous idea, not quiet enough power with the polisher i have ATM
-
how long roughly should it take 2 do a room about the same size as the 1 on the vid?
-
Should it would pal,if you don't know how to run the machine...Have you ever heard of feathering?
8:00
Wood Floor Restore - The all in one DIY kit to restore your floorby Woodfloorrestore63,962 views- 5:16
Hardwood Sand & Finishby TheVipfloors27,390 views
- 5:03
DIY Sanding Our Floorsby ThisOldErieHouse24,372 views
- 7:33
BELT DRUM FLOOR SANDER tutorialby CONOBJ68,998 views
- 1:23
How to varnish a wooden floorby RonsealDoesExactly32,403 views
- 2:54
Dana Floor Sanding - Hardwood Floor Installation - Time Lapsedby captk5341,473 views
- 2:40
Water Based Finish Applicationby refinedhardwood70,880 views
- 9:09
How to Sand Floors Part 2by patrickdaiglefloors9,992 views
- 1:00
How To Sand Wood Floors - Part 1by ClarkeAMS136,749 views
- 36 videosFloor Sanding
- 5:45
Floor sandingby sren99419,955 views
- 3:28
Mr. Sandless Wood Floor Refinishing - As Seen on HGTVby MrSandless386,649 views
- 4:31
Floor Sandersby giltsurcingles24,563 views
- 1:21
Which Floor Sander to use belt or disc.by CONOBJ36,598 views
- 1:15
how to refinish wood floorsby repairguide27,166 views
- 9:56
How To Sand Wood Floors - Part 4by ClarkeAMS101,640 views
- 0:34
Finishing Wooden Floor Sandingby theoldflooring4,407 views
- 4:38
TIMBA - FLOOR SANDING WOODEN www.klindex.itby ROBERTOBIBIANO22,698 views
- 1:37
Are my Floorboards too damaged to sand?by MarkSharron8,260 views
- 2:14
Dana Floor Sanding - Erie's Dirty Jobsby captk536,281 views
bgggbb .... Usually when you stain you vibe sand around everything you hit with the edger before the buff. Always go down a cut if you cut with 120 for a final on the edger go with a 100 grit on the vibe for stain! And for the love of god get a new machine this thing looks like shit. Get a Lagler Hummel?!?!
winger1123 2 years ago
this film is over 2 years old. look at other films to see knew sanders and vacuum unit that would put a hummer to shame.
tankhamer 2 years ago
How long do you let the floor paste dry?
vetavitamn 4 years ago
the fine dust is mixed with a resin called Lecol 7500.
Drying time is about 30min-60min.
all the best dave applin
tankhamer 4 years ago