"Diesel" Radial 3-Cylinder short stroke with reed valve
Uploader Comments (bratte68)
All Comments (9)
-
What is the displacement and the power output?
-
Oh? and for the engine concept below?
you would need to know by feeed pump?
I an refferancing a plunger type pump like in nature
to the Stuwart 80 sieries feed pump, but with a loaded
Spring acting the down stroke, like the valve spring on an old Flat head engine,
-
This would nessetate a throughtle butterfly, in linked action to the feed pump depth. to controle run-away
-
All this while remaining a two stroke. But sharing the better ignition traights of the four stroke diesel fuel injection method?
-
Alowing thatt the feed pump be load governed or at least geared to a rail or channel alowing it to be moved in and out of the stroke against said bump cam lobe. Thus changing the feed pumps stroke depth , and alowing for a fuel richness variation?
-
Have any of you ever thought to build a cylinder with the exaust and intake ports lowered by 15-27% of the stroke, And put a single bump type cam lobe and a Steam-Engine style Water feed pump (acting as diesel injector) on to one, so the ports move air, and a slight amount of oil, while the fuel? is delivered thrue a one way pin valve type injector, with a check ball and spring? I think it would work far better and much cleaner.
-
Quite exactly what is ment,
I'm going to gues with one this small?
That it still has a small amount of nitro in it,
But I should imagine less than in a gasoline two stroke of same size.
-
By diesel, do you mean that it actually uses diesel fuel?
@Kingzoid:Please read the descriptions,also of my other postings and you will see that model diesel engine fuel contains kerosene, ether and castor oil in various concentrations
bratte68 1 year ago