How To Change Spark Plugs On A Chrysler Sebring (What Is On Your Mind) part 1
Uploader Comments (MrKT3001)
Video Responses
All Comments (7)
-
Ughhh
-
thanks ,wasn't as hard as expected..have the 2.7 2005 sebring,bought the 4 piece extension socket set, with the swivel end and 5/8 magnetic socket from auto zone,had to put in socket then add extension then ratchet and reverse process for the back set of plugs and use a flex-magnet to remove socket with spark plug due to lack of room,also a 1/4 inch drive socket with a 5/16 socket to remove back right plug hold down bolts.thanks for the info.
-
Yeah this is usefull info. ..i have the 97 sebring. Mitsubishi motor. And theres not much difference .. everythin is at same potition. Anyway the 3 in the back are had to get on. On my car I had to remove cylinders head. It was hard to me bcuz I dints had al tools .. sorry bad inglish I know :\
-
Thanks for taking the time!
Unfortunately for me I have an 04' with the 4 cyl. I read about some "plenum" that needs to be removed and a gasket that will need to be replaced. Ugggh!
Thank you very much for posting this video, I really appreciate it. I had the same problem as you, was quoted similarly silly prices to change the plugs. I've done the job myself, problem solved, thanks to you.
fujman100 4 months ago
@fujman100 your welcome
MrKT3001 4 months ago
what you have to remove what? are you trying to change you spark plugs or somethings eles
MrKT3001 8 months ago