CABINET NECESSITIES FOR INSTALLATION
Loading...
Uploader Comments (HomeRemodelWorkshop)
All Comments (6)
-
So what kind of screws would you recommend for uppers ?
-
Another good tip but i wouldn't use a drill that didn't
have a clutch on it as a driver.
As far as over sizing the pilot hole for adj of the piece. [clear hole]. It's a good idea, i just shorten the depth so more of the screw tip hit's solid wood fibers. .Sheet rock screws don't have the same SHEAR rating. They are also brittle. Also less thread area.
Base box's, i wouldn't care. Uppers, wouldn't ever use sheetrock screws. If it ever fell, you would be screwed.
-
i use #2 square tips with the countersink nibs on the screw. i install all kinds of wood types and they countersink themselves with no probs. but the multiple drills are nice to have though
-
The "real" Bob the Builder!
-
good info keep it coming.
2:17
DIY HOW TO SEE IF MY LEVEL IS STILL ACCURATEby HomeRemodelWorkshop10,231 views- 7:33
HOW TO GET THE MOST FROM YOUR STUD FINDER , LASER LEVELby HomeRemodelWorkshop116,752 views
- 5:04
MAKING STRAIGHT CUTS WITH A HOMEMADE JIGby HomeRemodelWorkshop309,174 views
- 6:33
RE-USING OLD CABINETRYby HomeRemodelWorkshop42,293 views
- 8:56
Realita Cinta dan Rock n Roll 9/12by sijeruk101,539,602 views
- 9:07
Cabinet Installationby totallystupid00184,921 views
- 1:30
Cabinet Crown Moldingby AsktheBuilder278,107 views
- 2:00
Kitchen Cabinet Remodeling : Natural Wood Cabinetsby KitchenRemodeling5,207 views
- 2:23
How to Install Concealed hinges on cabinets and doors with Hingemarkby bridgemick2116,988 views
- 0:45
Amerock Drill Templateby ATGstores10,297 views
- 8:02
How To Install Base Cabinets (Part 1 of 4).wmvby KitchenDesigner2133,893 views
- 9:25
Do It Yourself Kitchen Install Part III - 3by almostastar219,757 views
- 3:29
DIY-"How To Install Cabinets" Sample 1 of 6 "Counter Tops"by DoItYourselfBuilder13,364 views
- 0:30
Home improvement & remodel, Long Islandby localvidsdotnet1,654 views
- 6:12
How to Hang Your New Cabinetby jandssales65,572 views
- 6:09
Do It Yourself Kitchen Installation Part IIby almostastar213,928 views
- 4:52
At Home Minute with Billy Briggs-Cabinet Door Handle Segmentby BillyBriggsHomeFix4,321 views
- 4:03
how to install kitchen cabinets 2by rob678144,747 views
- 3:00
Settin' Up The Wall Cabinet'sby JimiGumba5,374 views
why arn't you recomending the combo bits, wiht adjustible length and sizes?
This would elminate the use of another drill set up. Please respond I would like to hear from another pro.
rileesdad7 3 years ago
I generally drill my pilot hole slightly bigger than shaft of screw,combo pilot bits with countersink won't do it that way.I have had much better luck making slight adjustments to fit doing it that way+++Bob
HomeRemodelWorkshop 3 years ago