TM-240, TM-260 Set Warning Thresholds: TireMoni Support Video

http://www.tiremoni.co.uk: How to set the warning thresholds for TireMoni TM-240 and TM-260 tyre pressure monitoring system tpms

Here you can see how to set the warning thresholds for TireMoni TM-240 and TM-260
for each axle.

Press the left button for 9 seconds and this will bring up the menu.

Set Threshold is the second menu and you have to press NEXT to get there
and confirm with ENTER.

The small triangle is at the top left, marking Lo Pressure
and the first axle is blinking.
Now use ADD and DEC to change the threshold value.

NEXT moves the triangle to Hi Pressure and now you can set the upper
warning threshold with ADD and DEC as before.

Pressing NEXT once more moves the triangle to the temperature warning threshold;
you can leave it at 70 degrees Celsius for good.

Pressing NEXT once more brings up the next axle blinking
and the triangle is back at the top for Lo Pressure.

As with the first axle you can set lower and upper pressure thresholds
and the threshold for temperature with the three buttons.

When you are finished, leave this menu with NEXT and then ESC.
The display will reboot and your threshold settings are stored and now active.

Category:

Autos & Vehicles

Tags:

• tyre pressure
• tyre pressure monitor
• tpms
• TireMoni
• driver-control