AMD Phenom II X6 1090T Overclocking to 4GHz FULLY STABLE! 3DMark Vantage Test

So I had two problems.
One of the problems fixed by gigabyte was that something was wrong between a Sata III controller and the BIOS so every ~30 minutes i had a bluescreen. They upgraded it and it works fine now (New BIOS was not available to download at that time when my motherboard was on RMA)

Second problem was with the CPU Errors.
That was caused by the CPU memory controller that is supporting 1333 mhz memory MAX! And i have 1600 mzh modules! AMD says that the CPU can run faster memory but it is threated like overclocking and they don't guarantee stable work. On my memory i have a Black Edition Memory Profiles but the 8xx series chipset is not supported on the program right now so i can't reach 1600 mhz now and i have to run the memory on 1333 mhz but i don't see any performance issues (rely i don't feel any difference)

(BEMP something like XMP on Intel's site but you have to download the profiles from the web via AMD overdrive instead of having them on the memory itself)

Category:

Science & Technology

Tags:

• AMD
• Phenom
• II
• X6
• 1090T
• Overclocking
• to
• 4GHz
• FULLY
• STABLE!
• 3DMark
• Vantage
• Test
• gaming
• Radeon
• 5870

[jenjer515515]

How did you get the vcore that low? I have the sabertooth 990fx and the 1090t be. My machine won't boot with that voltage

[ZastrzykHD]

@jenjer515515 I've just set this voltage and it worked 24/7 . I did not have to do anything more other than increasing the multiplier of the cps.

[R3AP3R664]

what are the track names! the music you play throughout ? thanks

[ZastrzykHD]

@R3AP3R664 1st- Mass effect 2 soundtrack - club eternity 2nd - Trash80 - Missing you 3rd is the same as 1st 4th Professor Kliq - Bust This Bust That and that's all (:

[R3AP3R664]

@ZastrzykHD thanks for the quick reply... nice rig by the way.... youve probably upgraded margainly since :D

The CPU is still king as the Bulldozer was a dissapointment

[ZastrzykHD]

@R3AP3R664 Np.

Yea I am stunned how bad the new AMD CPU's are. I was expecting A LOT A LOT more than that piece of crap.

[DuyAnh1]

@teringvideo right now I'm using a 1100T and it's running @4.11Ghz with 1.525VCore ;P

So far no BSOD hehe... happy me

[teringvideo]

@DuyAnh1 Me 2 on 1.5125?.... any lower and it crashhh

[awnful]

thank u ! runs fine.

[DuyAnh1]

how come no score for Overclocked 4ghz result?

[DuyAnh1]

1.5125V for me for 4ghz ;O

[HeWhoGameZ]

i have the 8 core fx and i have 5.5ghz 5.6 is a bit too much

[omg123596]

Well I've followed your steps and overclocked my 1090t to 4.0ghz, but I also have 1600mhz ram, so I will only be able to run it at 1333 when it's overclocked?