Arduino I2C Newhaven LCD Count Test

For Source Code see datalogger ibutton programmer project at:

http://arduinofun.blogspot.com/

Newhaven NHD-0216K3Z-FL-GBW 2 row x 16 LCD up and running on an Arduino in I2C mode. (Only two inputs required plus power and ground!). Modified sample code from http://store.fungizmos.com/ where I purchased the display. Simple count test loop from 1 to 59. Pictures of setup at: http://www.flickr.com/photos/27495078@N08/sets/72157605466902960/

Category:

Science & Technology

Tags:

• Ardunio
• I2C
• LCD

[conman33311]

ya i got an arduino for chistmas and a nhd-0216k3z-fl-gbw lcd screen like you what pins did you use for it i was wandering becasue im a begginer XD very excited about it so thanks for vid

[jmarduino]

Check out the description. There is a link to pictures that I took showing the pins. Also checkout the forum at Fungizmo's site where I purchased the LCD.

[conman33311]

ok ty i have to get a new soldering iron to solder wires and the jumper if i solder the jumper will other configurations be messed up?

[jmarduino]

The jumper puts the LCD into I2C mode. The sample source code is at Fungizmos site.

[HaloHedgehog22]

Do you know the model or number or something? I'd appreciate it.

[HaloHedgehog22]

Where can you get the LCD screen? I can't fnid them anywhere...

[jeroen79]

That's right.

It should either go from 60 to 1 or from 59 to 0.

[biteme2367]

Just a thought. If you are to use this as a time keeper, you would loose one second every minute, and loose one minute every hour.

[jakx50ha]

kkkkkkkkkkkkkkkkkkk

[hyphenex]

That's very cool. And so few wires. I love it!