Dogsaver Starship Coil

New Dogsaver Starship type coil, wound with 16 turns of #20 doorbell solid copper hookup wire, wound in a special octagonal configuration discovered by cakegy and shown in one of his videos. It exhibits a lot of power in the center area.
I've included the schematic for the driver circuit, which employs an IRF350 mosfet power transistor. It is the same circuit the Orb Weaver shown in an earlier video.
Thanks to Rich Motzer as well for discovering how to make the Starship type coil and save us a lot of time in the winding efforts. The 147258361 winding pattern round the octahedral figure yields strong magnetic fields and energies in the central area that I'm still exploring. The one inch diameter neodymium cylinder magnet is magnetized thru the diameter. It goes 10 to 12,000 RPM with rather strong troque from just a small +12volt brick power source. Aloha

Category:

Science & Technology

Tags:

• rodin coil
• starship coil
• pulse motor
• bedini motor
• magent motor
• motor charger
• tesla coil
• hall effect
• mosfet driver
• abha coil
• rodin effect
• vortex math

[Kermitkramer]

sorry, my finger hit a wrong key before I was finished. How many feet of #20 twisted pair bell wire did the coil take?

[jackscholze]

@Kermitkramer yes it is only 2 coils in series, not 4 ( lazy me re-used the drawing ) The coil is 9 inch diameter.

It is all #20 solid copper doorbell wire. Not hardly twisted. Each leg of wind is 8 inches x 8 legs = 64 inches per one wind. 64 inches/wind X 12 winds = 768 inches approx or 768 /12 = 64 feet total.  hope this helps aloha

[skycollection]

Jack is an impressive coil, do you have tried to place a triguer coil in closed loop within that great hole…?

[jackscholze]

@skycollection Making a conical pickup coil for putting in the center, and also try some regular coils soon. Aloha Jorge, take good care and keep building your fine motors and generators.

[cakegybakery]

This can be interpreted as the energy would like to crystallize where

the center is, a quartz can be used for test, if it react at once

with the vibrating wave and hover, no, not that simple, a stone not

a magnet, but still it is reflecting around the center.

[jackscholze]

@cakegybakery Thanks for the notes Johnny, yes there are still a lot of resonance tests at different frequencies that I will be doing on this coil, also winding a "Dogsaver Donut" version to contrast it with the Starship version. Also try 60HZ mains AC with split secondary and +V as well as -V source power, floating ground and earth ground, and coffee ground.

[JabrilAqdas]

@jack very 9ice Ty :)

[Kermitkramer]

Jack, what's the outer diameter of the starship coil? I guess you hooked the twisted pair windings in series. Your schematic shows four coils connected in series, but I'm guessing it reffered

[stevenchiverton]

@skycollection  can someone upload a star ship coil drawing explaining how to wind pne of these so i can try to make one to what i see mostly is star-ship coils but no real good info how to make one and allso include the nails nail pins and numbers to where the winds go to

[teebodean]

This one is beautiful. Seems to be pretty powerful. My fav is still the Neo-ball spinner one. I bet I can mix drinks with THAT one. Hey, we need an RPM count here. Power rules!

[SCENARIOBABY]

holy Acacia !