Turning my Christmas ornaments
Loading...
Loading...
2,814
Loading...
Uploaded by drdarkside on Dec 15, 2010
This is the 10-minute version -- about 5x speed -- of my holiday turning project. It's a "hollow" ornament in that I drill through the rounded stick and then turn a globe around the openings. This one is from a piece of Maple. In real time, this project takes me about an hour from start to finish. I'm just not that fast ;-)
Uploader Comments (drdarkside)
see all
All Comments (3)
-
That's really good.
-
Beautiful Ornament. What did you use for the metal in the top?
Loading...
5:22
Ornament Body Segment 4by bobham55,285 views- 2:18
How to Make an Ornamentby Pro2Films684 views
- 1:07
Woodturning Ash-ciclesby drdarkside1,778 views
- 6:02
Stick Fast CA Wood Finish Systemby carlandjeanne3,180 views
- 8:53
Natural Edge Cherry Burl Bowlby MartinPens10,334 views
- 1:33
Roughing Down with a Skewby coolhammerman23,360 views
- 10:01
Classic Woodturning Projectsby woodturningreviews5,579 views
- 10:23
Pen Turning: Super Glue Finishby onewaytoturn20,563 views
- 9:51
Ornament Pendant Segment 2by bobham52,565 views
- 6:05
Woodturning with 150hp lathe -Crazy Canadian Woodworkingby stockroomsupply26,435 views
- 4:48
Wood Turned Art Demonstrationby timelesstim34,837 views
- 4:15
Christmas Ornaments YouTube Short Previewby coolhammerman6,124 views
- 1:16
Pen Blank Sizing and Cutting Jig at Penn State Industriesby PennStateIndustries5,429 views
- 31 videosProjects
- 14:55
http://www.freewoodturningvideos.com - Hollow Forms with Sven Part 3by FreeWoodturningVideo6,636 views
- 2:23
Birdhouse Ornament Tip 101by WoodenNicol1,728 views
- 3:41
Coolest Origami EVER!!!!by tinhyeusetdanh4,025,334 views
- 0:52
woodathome_0001.wmvby WoodAtHome12,614 views
- 12:54
74 centerless finial.aviby capneddie1,359 views
- 7:42
Small Simple Boxby ric47scroll2,478 views
Thank you. Just some brass jewelry finishings I got at a local hobby shop. Tiny eyelet on about a 1-inch post about as thin as a straight pin. I drill with tiniest bit I have, bend the post with needle-nose pliers to give it some bulk and reduce the length, and put a drop of CA glue on the folded tip before inserting into the top.
drdarkside 1 year ago