experiment #2 HHO resonance

hho resonance experiment hydrogen ala HIGH VOLTAGE- using tap water

Category:

Science & Technology

Tags:

• hho
• resonace
• high
• voltage
• water
• split
• production
• potential

[hervevdb]

Very good experiment. I wonder what components you used in your VIC circuit. I think that your are on the right way so far... I have made some transformers and coils but it is not easy to get a resonnant circuit or to send over the right up step frequency.

[plitwo]

Thanks hervevdb, My though is- if you hit the tank circuit with high voltage with enough current to ring the tank, the tank will start resonating on its own until it decays. similar to a Bell being hit with a hammer. Once it starts oscilating then a detection circuit can catch the ring frequency and start driving the circuit with the matching frequency. I'm still designing the circuit to accomplish this. I have seen the Ring effect on the scope. Once the match is reached, current should drop.

[plitwo]

ill hook up a lamp in series to find out- thanks for the suggestion.

[plitwo]

it seems i do have some RF components on the primary, thus causing a HV RF on the Secondary - caused by the fast switching of the MOSFET- Im placing a low pass filter on the input of the MOSFET to remove the noise.

[kokopelli314]

I haven't tried pulse trains but have had some luck sweeping a 50/50 square wave from 3 to 20kHz while monitoring the dc current draw. Of course, every cell would be different but I recorded increased current at specific frequencies.

[hydroxy62]

could you post the scematics of your circit???

[Rossman2003]

Now inject the water into the spark and you will get H H O+

Use a diesel plug to modify and loose the plates

[novkaxfire]

If I noticed correctly u have bifilar choke on normal transformer for low frequencies.Thats why there is no production.Put transformer on ferrite core or simmilar so current can pass on high frequencies and rich the water tank.

[steblizz]

you have to find the autoprotolysis frequency, then you will know how to break the water molecule with resonance very easily, with less energy than what it will give you when recombined.

[WilliamTapley]

From one of the texts I've read, it talks about amp spikes that occur from contaminants in the water. I think that is the key to finding resonance and locking on. You need a circuit that slowly rises in frequency until there is no amp spikes, and the amp draw runs down to a few milliamps. So measure amp draw instead of trying to find resonance, as the resonance will always change with varying qualities of water.

[tonsostuff]

You are on the right track. Build a test capacitor. Use two plates, insulate them and use distilled or osmosis water, build your circuit to create a very high voltage potential across the two plates, and experiment with the proper voltage, plate gap, and frequency from there. Very little if any current should flow through the water. Most of the current should be consumed by the resonating circuit. This process is Electromagnetic Disassociation.

[afdhalatifftan92]

Thanks for sharing!!

Hey, I'm thinking, what if the VIC circuit was a "joule thief circuit"?

What ya think?

[dmgcat]

Maybe he did find resonance but the oil companies got to him first?

[crippled82]

resonant freq of the water is determined by the gate frequency, primary resonance frequency is for the vic like you said.