I checked LAGUNA bandsaw at other's workshop for purchasing.
It is very solid and nice machine.
By the way, continous spark occured during sawing.
I think it comes from steel cylnder block when contact with blade backside.
Are there anyone have this experience?
Is it normal problem?
K.S.SONG / SEOUL KOREA
This stems from a dirty blade (not wood). Make sure you always clean the manufacturing crud off of the blade with some kind of alcohol sovent such as naptha or denatured alcohol and use a dry lubricant prior to installation.
NGinuity 2 years ago
lol it would suck if it was a metel cutin bandsaw with some lube on the metal poof
nolatoolguy 3 years ago
I've used this bandsaw a lot and it sparks a lot but it shouldnt be a problem, although for safety sake I dont hook it up to the dust system. I helps to take a stone to the back of the blade from time to time to prevent mushrooming. Also, if you can afford two bandsaws, keep this one for ripping and other straight cut as curves can mess up the ceramic guide blocks.
gaslunchcigarettes 3 years ago