Blade 400 swash problems
Loading...
Uploader Comments (EmptySpace0)
All Comments (5)
-
I've got the same problem - even worse if I do left/right on the stick - the swashplate goes back and for if I do stick left and right - the swash goes back and for - like everything is 90 degrees off
-
sorry I dont know that much about the DX6i, and yes my heli is currently in 189 parts on my dining table, I take it your on Heliaddicts. if not show them the video they will set you on the right path.
-
can you tell what your swash mix settings are in your TX....Also have you recently crashed your heli?
-
Looks to me like you have one of the servos connected into the wrong slot on the Reciver.
the swash should move forward off level with alot of throttle but no were near that amount.
I will check my setup when I get home for you, and let you know where the throttle should be plugged in.
0:36
Blade 400 Servo Problemby daveamber1002803 views- 0:27
Blade 400 swash plateby symowallo741 views
- 2:00
Blade 400 Problemsby SV01Suzuki2,002 views
- 5:50
MSH Protos Swash Plate setup and leveling using TNN toolby tin17577,120 views
- 2:53
Blade 400 Swash Plate Questionsby Infernobowler3002,849 views
- 1:57
Blade 400 Stuffed Aileron Servoby SeaComms13,115 views
- 0:34
Blade 400 Swash Plateby OSUbronco2,397 views
- 9:12
Swash-Vision with the FCO2by manocs3962,133 views
- 0:20
Blade 400 - Swash Plate Wobble or Vibrationby gousa2005209 views
- 9:03
Blade 400 3d Head Setup Part1by sokal1165,229 views
- 9:02
Crash Course in 120 CCPM Setupby DavidSunshine86779,104 views
- 1:28
Blade 400by Smudgyeboy444 views
- 9:55
Blade 400 Rotor Head Repair, after a Boom Strike.by NightFlyyer82,471 views
- 1:07
Blade400 malfunctionby cmacclel4,816 views
- 10:00
HorizonRC.com How-To: First Time Blade 400 Pilots - Try our DX6i Setupby HorizonRCdotCom145,196 views
- 3:42
BLADE 400 MADNESS - CLIMBING ROTOR STALLS, LOOPS, ROLLS, AUTOby CrazyHeliDude18,704 views
- 2:28
Blade 400 vibrationby r6yamahar16,462 views
- 1:27
Blade 400 backflip/loopsby rotarydoc298 views
- 7:27
Awesome Blade 400 hoveringby EmptySpace01,451 views
Oh yeah you have it set in 120 degrees well in that case your servo may be bust mate,check that out.
Cheers Grant.
heliman85 3 years ago
I replied to you guys earlier but I didn't work for some reason. The problem was that I reversed the aile and rudd on the dx6i when I was using phoenix. Thanks for the response you guys.
EmptySpace0 3 years ago