FAL Disassembly Part 2

Disassembling the lower receiver of your FAL. Sorry but like a Dumbass I was calling the trigger the hammer in parts. I guess my brain figured it would take a crap at the wrong time.

Category:

Howto & Style

Tags:

• FAL
• Dissassembly
• Fusil
• Automatique
• Leger
• STG-58
• L1-A1
• gun
• gunsmithing
• firearm
• 7.62

[MrCvjetko]

hey verry nice video! i learned much from it!

i own a stg 58 steyr daimler puch fal al numbers match its in verry good condition but do you now if the qualitiy of the steyr fal is better than the english one ore the fn? my fal works proper on german men ammo on gas position 5.5 do you no how to remove the bullet extractor want to clean under it !it is spring loaded i think

btw im from holland

thumbs up!

[elal757]

@MrCvjetko Glad you enjoyed the video. As far as quality, pretty much all FALs are of top quality (the exception are those that have been shoddily constructed by importers, and many aren't fond of Indian FALs)

[elal757]

@MrCvjetko They sell a tool for the extractor, but you can remove it out with a loaded cartridge (or a punch.) Simply make a fist around a cartridge so the bullet is pointing out with your thumb. Hook the tip of the bullet in the recess in the extractor plunger and put your thumb on the back end of the bolt and pull the plunger back. Then pull the extractor out with your other hand. Do the same to put it back in. Just be careful, the extractor spring has a LOT of pressure on it.

[ichimonjiguy]

What is the white section in the tip of the stock tool for? I bought my stock tool used. It doesn't come with it. Is my stock tool still gonna work?

[elal757]

@ichimonjiguy

That's just a brass tip, not necessary.

[jjtmmmm]

you dont have to do all this to clean it do you?

[elal757]

no, it just needs to be field stripped... remove regulator, piston, spring, and bolt.

[amrlotus]

'Great Video ,you only missed the removal of the firing pin and the removal of slide from breech lock ,can you do a video on lighting the fN Fal trigger i think mine is probably like 12lbs :))))

[charliecharlie58]

The butt stock tool is a plus. It makes life so much easier.

[qylhntr]

If you dont have a buttstock removal tool you can loosen the nut with a quarter. then insert a small caliber pistol cleaning rod through the hole in the nut untill the handle almost touches the nut. slowly unscrew the nut and be ready for the spring pressure. works really good with the end of the barrel resting on the floor.

[Thatevilmidget]

Excellent video! I had to pull the trigger and sear out on mine when I was installing the FA sear (post dealer sample on a preban Imbel receiver... all sorts of fun there between the paperwork and the actual build. I don't really recommend it to anyone), and it took me about 30 minutes to get the damn thing back in. I don't recommend trying it unless you absolutely have no other choice.

[toddclites]

Thats an awesome video,can you explain how to remove the reciever catch?Im not sure how to explain what piece Im talking about.Im having it duracoated and it has to be completely disassembled. Thanks