G59 SDR Transceiver Build - Introduction

Unpacking the Genesis G59 Software Defined Transceiver kit. I show what comes with the unit and how to get all the instructions and Build of Materials. I also talk about getting prepared to melt solder and doing parts inventory.

Building and operating your own equipment is still the ultimate goal of amateur radio, and Genesis will give you exactly that: Fun to build, fun to operate! There are so many things you can do with it, from regular 2-way Morse contacts, phone, digital modes like PSK, to RTTY or WSPR - Truly, the list of activities for which you can use your G59 is practically endless!
If you're into QRP, DXCC chasing or serious contesting, the G59 will deliver unparalleled performance you won't find in much more expensive analog radios.
Do not underestimate this kit based on its low price - This radio is a serious performer that will give you many hours of on-air enjoyment!

The hardware and software required to get you On-Air:
G59 transceiver, GPA10 amplifier, quality SDR suitable sound card, a fast PC running Windows XP and the GSDR software.




Key specifications

Receiver:
adjustable synthesizer with 1Hz step, IIP3 32-35dBm,
MDS: -116 to -122dBm (RF preamplifier ON: -132 to -134dBm.).
RX Sensitivity is 0.15-0.2uV for 10 dB S/N ratio and max S/N measured ratio is 70dB.
Image rejection is from -35dBc to -50dBc (hardware) or better than -80dBc (hardware + software). SFDR (Spurious free dynamic range) is 93-100dB or over 100dB for G59C.
Receiver 1dB compression point is + 10dBm.
Second RX antenna input.

Transmitter:
G59 output power: 10mW, GPA10 output power: adjustable 0-10W.
Carrier suppression is from 45-60dBc (hardware).
TX Image Rejection is from -35dBc to -50dBc (hardware) or better than 60dB with GSDR software.
G59 has built-in microphone preamplifier, IAMBIC keyer with CW monitor.

Category:

Education

Tags:

• G59
• Build of materials
• BOM
• schematic
• diagram
• genesis
• sdr
• software defined radio
• radio
• transceiver
• transmitter
• qrp
• kit
• build
• solder
• pcb
• parts
• ham radio
• amateur radio
• ham
• amateur

[gauravpride1985]

what is the price for that !!

[GeoN0JRJ]

@gauravpride1985 Here is the web link. Check for prices on the site to be accurate. w w w.genesisradio.c o m.au

[therealcloudycity]

Thanks a lot for this series of videos. My kit is supposed to be shipped today (April 7) and your organizational skills are very valuable.

[GeoN0JRJ]

@therealcloudycity Thank you for the kind comment!  Good luck on the build my friend!

[GeoN0JRJ]

No, but now that you mention it it sounds similar. Its some open source stuff I got off the internet. I love Amateur Logic. Wish they made more. Good luck on the build. Please let me know if there is something specific you think I could include that might help you or other builders! I have a pretty full work travel schedule so I might be kinda slow. Itching to get it on the air!

[gauravpride1985]

@GeoN0JRJ : Thank for your support .Can you please send the Data Sheet and more details about the SDR Kit.So that i be clear about the technical specification this kti .

[hopdoehop]

dam it

kit sellers

now days do not include a real manual

you got to use a computer

if you do not have a printer it is a major pain in the ass

not like ive got room for a computer

on my work bench

[1Rowdy1derful]

Or maybe if you understand resistor color codes, it would make sense.

[mukerjea]

Thanks for sharing. I received a kit for SSTran AM Transmitter but haven't opened the package yet.

[tjbewick]

@GeoN0JRJ Don't worry I am building very slow too. With my inexperience and family responsibilities I don't expect to have it done until summer at the earliest. So "looking over your shoulder" is a great aid. Your off to a great start and if there is anything I think of to cover in the videos I will post it in the comments. The only thing that comes to mind now is having you go over the testing procedures as you finish each stage. Thanks again and 73 Tom N2BEW

[Prizmatic0]

Good luck with the build. Looking forward to future vids.