RC Plane Jet Scale Electric Retractable Landing Gear Retract

Exciting new electrical retracts that weigh only 6.5 ounces for the total setup. Each strut has almost an inch of downward spring loaded travel for maximum shock absorption. Installation is as simple as mounting into your model and connecting the 3 retract units servo wire plugs into the master retract controller then plugging controller into your receivers gear channel. No air tanks, air lines, or complicated setups. Does require one servo for the nose steering. Struts are removable from retract unit allowing you to customize for your particular application.

Category:

Science & Technology

Tags:

• rc
• jet
• airplane
• electric
• micro
• scale
• retractable
• landing
• gear
• struts
• retracts

[shoney1102]

how u get them to move so slowly?

[sonicrcmodel]

Using a lot of different rated internal gears combination to reduce retract speed.

[STtheboy]

@ubermarklar yea but im very picky about wat it looks like. for instance the raptor that i buy has to have full paddle fuction in the back not jus the corners that are clipped

[ubermarklar]

@STtheboy simple. buy an f22 with retracts installed!

[STtheboy]

yeah same here im about to buy a f22 but its ducted and i think it looks strange flying with the gears down so yeah can i get a little help

[OriMedian]

man this is awesome can u help me tell how servo's work?

[addew2]

cool

[sonicrcmodel]

Sorry but the gear don't currently support rotation on retraction. The nose gear is steerable and will rotate 360 degrees but that is when the nose gear is in the down position. You may be able to modify it to support you need.