Magnetic Vortex Electrical Generator

This is a very crude recreation of a device created by Bruce Depalma, which he called the "N" Machine. He claimed that the machine could create over unity electrical energy in a ratio of 5 to 1. That is to say, that the device created 5 times more electricity than was needed to run it. Here is a good explaination of how the device works.

http://depalma.pair.com/Absurdity/Absurdity08/FaradayDisc.html

Michael Faraday created this experiment back in 1831, but it is unclear if he discovered that it is capable of over unity energy production.

Faraday believed that the magnetic field remained stationary and locked in space, while the magnet and coil revolted around it and by the classical definition, the coil cuts magnetic lines of force and thus, creates electricity.

The truth however is a little more complicated. The device is really just a magnetized gyroscope. A magnetic field is made of two vortex's of spinning etheric energy. The special coil catches one of those vortex's perfectly, and is able to access the magnetic field directly, which is of course a perpetual motion of energy. So the coil taps the energy from the magnetic field directly, and is able to draw off infinite amounts of energy, because the magnetic field compensates for energy lose all on its own. A magnetic field can create infinite amounts of energy out of thin air. To understand how this is possible, one needs to understand the true physics. String theory is completely wrong. That idea is something mathematicians created which has little connection to physical reality.

My website tries to explain the truth.

In the video it is hard to see, but my machine makes about 0.1 volts of electricity. I'm running it at 4.5 volts. The coil is obviously way too small and the unit is running at about maybe 800 rpm. Depalma's machines ran at 7600 rpm. I will create a new coil in time. My current coil is about 1 meter in length, so a new coil of maybe 10 meters should produce alot more electricity.

I have as of July 17th created a new coil which is about 10 meters in length and is of a finer gauge. After testing I found that the new coil produced about 3 times as much electricity. Ive posted a couple of pictures of the new coil at the bottom of this page of my site.

http://www.freewebs.com/cropcirclelanguage/inventions.htm

Category:

Science & Technology

Tags:

• Bruce
• Depalma
• Machine
• gyroscope
• magnetic
• vortex
• ether
• over
• unity
• zero
• point
• field

[ilav1m8y]

The gist the compensation coils operation is simple, you just look at the magnetic feild of the rotating copper disc as the current takes the shortest path from - center to the + outter rim, at a 90 degree angle to current flow. Now if you look at the magnetic feild of the outer compensation coil "0" the magnetic field is at a 90 degree angle.Those magnetic feilds intersect and cancel each other out, the KEY to the N machines operation is to put the energy taken recycled back into the N machine.

[spiritelemental]

@ilav1m8y Please define what you mean by compensation coils. What do they look like? How many of them? Where are they located? What size are they? Where is some public information about them? etc...  Thanks!!

[spiritelemental]

Adam Trombly built a working free energy machine based upon a similar concept as Bruce Depalmas N - Machine, as far as I know.

[spiritelemental]

AdminOnDuty, Ah, thank you for that! I see youve already seen for yourself this phenomenon of a magnetic field that operates independent of the iron that holds it. Please take a look at my video of the Improved Magnetic Vortex Electrical Generator. I havent been able to get it to produce much electricity yet. I have also modified it by attaching a special copper disc to it which I have a picture of at my website at the very bottom of the inventions page. So what am I doing wrong?

[spiritelemental]

I have 2 pancake coils almost 3 inches across attached to the permanent magnet and with about 12 meters of copper wire in it. I also have the spiral copper disc I built attached to the coil, and I am using the copper pick up arms (brushes) of a couple of small electric motors. I even fed the voltage produced threw a transformer in hopes that I could read a higher voltage with my meter, but to no avail. Is my meter not sensitive enough? I am so close, but Im missing something. Can you help me?

[spiritelemental]

His site is project - earth - dot - com.

[asteroceras]

It sucks that people have to know "true physics" to understand basic thermodynamics. That must be why we have failed to create space travel, nuclear power, microprocessor technology and the internet. Fortunately, it has allowed us all to have unlimited power from little boxes of magnets that people spend lots of money on then leave in a drawer in their garage after a couple of years and forget about.

[InscrutableOutlander]

try it with Cymatics



[TheJobiwon]

DePalma did not invent the N-machine, as is popularly believed, at least not one that worked. He was allowed to help with the project, but only after the core had already been built. As far as I know he never succeeded in building one on his own as he did not know the details of the core. N-machine was a name that DePalma used to refer to generators of that type, but it is not what the actual inventors called the one that worked.

[virgojeep1]

So have you achieved an anomaly point yet with this tech? From what I am observing it seems like your putting more energy in than what you would get out. Plus the compression and acceleration of the magnetic field is limited by the rpm of the device. How does this device allow for multiplication of the phase velocities of the energy being created?

[BPinard]

You guys are all nuts.

[ilav1m8y]

@iHeartElectricalEng "Streptation" just means rotating, Tesla describes rotating magnetic fields which are also known as streptation fields which just means rotating fields. The thing thats interesting about this device is the solid state applications of this using reletivity where you'd get inertial effects just from rotating the XY plane of the magnetic field. I even suspect that a voltage/frequency field driven solid state N machine with no moving parts should also be possible.

[ilav1m8y]

I'd built a model N Machine about 11 years ago, mine was just a toy motor with a plastic planetary gear I got as a $35. kit with 4 Neodymium Iron Boron Magnets about 6CM across with a Kabab and 2 copper plates. The key to it is the outer compensation field which uses Bloch Walls N/S-N/S with outer compensation coil S/N-S/N that is equal in amplitude and opposite in sign. I'd got more than 100% efficiency using the compensation coils

This is the simplest OU, don't tell anyone if you build it