Building my Surfboard 1 - the $30 Blank
Loading...
Uploader Comments (potsie1138)
All Comments (31)
-
cut the foam in half make two cutouts of the board with the halfs get very thin ply wood (I'd use balsa because its better) cut it exactly like the foam then sandwich the board between the two pieces of foam seal with epoxy or fiberglass do the planing sanding rails and paint then fiberglass a couple of times that's how I learned to make boards
-
wow you can get that material from home depot, and it supports your weight? why buy a 400$ board when you can make one
-
when do i put the fins on?
-
hi guys where can i get a foam so thick?
-
What kind of glue did you use to glue the two foam blanks together? Also, I don't understand how you made the rocker. You bent the foam and then glued it? How did you glue it? Lastly, can styrofoam be shaped with sandpaper?
-
@jerdaskater12 The fall is better than the winter, late summer and early spring also get good. People just think you can only surf during the winter because its the "craziest" time to go(not really tho thanks to ripcurl) and receives the most coverage from media and such
-
@nickscrps yeah u can but only in winter witch is gay
-
hey when you bought EPS blank was it a partially preshaped.
-
hey, where did you get a $30 blank from?
-
you're a kook!
4:02
Building my Surfboard 2 - how it was doneby potsie113817,325 views- 2:41
Stand Up Paddle Down South....by islesurf11,071 views
- 5:46
Making Wood Surfboards Part 1by rickndianacom10,329 views
- 2:37
Jeff Martin on Building a Grain Surfboardby GrainSurfboards17,977 views
- 5:01
How It's Made Surfboardsby thatsmynamedude35,429 views
- 62 videossurf2
- 0:43
Building the FP12 hollow wooden surfboard: laminating the panels on to the rocker jigby RoyStewart15,713 views
- 14:05
How To Build Your First Surfboard - Familiarizing Yourself With Materials (Part 1 of 2)by surferstevedotcom18,604 views
- 3:55
Surf in the Making Part1by TicoMaster15,598 views
- 5:01
Surfboard Building, shaping, glassing, making surfboardsby wavrydrsurfgear12,747 views
- 1:17
HOW TO MAKE A SURFBOARD...by hlelot26,474 views
- 8:52
Hand Shaping a Surfboard: Todd Proctor, Proctor Surfboardsby ProctorSurfboards81,781 views
- 2:15
OCEAN FOAM SURFBOARD BLANKSby looseman7031,887 views
- 11:00
HOW TO MAKE YOUR 100% RECYCLABLE FREE SURFBOARDby Bluesoulhawaii23,162 views
- 5:10
Surfboard Building - Shaping, Glassing - Wavrydr Surf Gearby wavrydrsurfgear39,521 views
- 2:01
RAYSKIN hollow wooden surfboard. http://www.rayskin.comby fzmediadesign45,141 views
- 3:57
Building a wooden surfboard frame panelby RoyStewart17,280 views
- 1:57
How to made a surfboard - epoxy fiberglass custom shapeby petkuna16,812 views
- 4:38
Proctor Surfboards: Shaping a Surfboard, Digital Surfboard Designby ProctorSurfboards20,198 views
- 5:32
Hobie Surfboards Shaper Terry Martinby garylarson3432,597 views
- 2:21
Surf Board Shapingby surfingshark14,566 views
Great Lakes? Everyone knows you cant surf on a lake. ;)
nickscrps 2 years ago
Ha- you should search for the movie on here CALLED "everyone knows you can't surf the great lakes"
potsie1138 2 years ago
yeah i'm starting shaping pretty soon any tips or instructions... i'm an amateur and i think i'll suck at this. i'm only good with the graphics
thanks:)
FonNanudon 3 years ago
shaping was quite easy, but it took a while cuz I did it all by hand using hand planers and sanding blocks...no power planer! Don't worry - you'll have a blast doing your first one - i did!
potsie1138 3 years ago
nice vid, what is the name of glue you used? i need a good glue for eps foam. thanks.
jimijamesh 3 years ago
I used SOLVENT-FREE contact cement, and 2 tubes of Dollar-Store-Brand 5 Minute epoxy.
I had more success with the latter; it worked beautifully.
potsie1138 3 years ago