DIY: Acura RSX Type-S SeaFoam Sea foam Smoke out! Part 2

Seafoamed a 2002 Acura RSX Type-S with 82,000 miles on the engine.
A little spirited driving after using the seafoam

Process:
=Be sure the car is up to operating temperature.
=Disconnect the brake booster line at the brake booster, ensuring that the line is still conneted to the intake manifold.
=Pour 1/3 of the Sea Foam into a cup.
=Slowly allow the hose to suck up the Sea Foam (becareful to not let the engine stall)
=After its all sucked up, put the hose back and shut off the car.
=Wait 15-20 minutes
=Start car up, rev the engine up and down for several minutes to help loosen up the carbon.
=Finally take a spirited 15-20 minute drive to clean out the rest, being sure to keep the revs high to clean out the carbon.
=Your Done!

Category:

Autos & Vehicles

Tags:

• k20
• k20a2
• k20a
• k20z1
• integra
• honda
• acura
• rsx
• type
• rsxs
• seafoam
• sea
• foam
• smoke
• cloud
• screen

[tom9665]

I used to poor it in the engine oil is that wrong ?

[hondaspeed05]

@tom9665 no, the directions say that you can pour it into the crank case as well as the gas tank too.

[hondaspeed05]

not long at all, id say less than a minute.

[hondaspeed05]

Smokin out the street! haha

[TheEghatch93]

How long did it take for smoke too go away