How to MIG Weld : How to MIG Weld a Butt Joint
Loading...
Top Comments
All Comments (53)
-
I like the video but wish it wasn't recorded with a calculator
-
@charleyfarley321 Perfection can always be improved. Why do you think professional footballers have coaches?
-
@aakuhlmann teehee
-
@Bluesman74460 If in still air push or pull, its your choice. Overhead is a different matter. Practice a lot on scrap to perfect the settings of the machine, and wear good protective clothes as I guarantee weld will drip where it hurts BTDT, Ouch!. Mike
-
@mankybub Pull welding keeps the gas shroud over the cooling weld bead and helps stop oxidation of the still hot weld bead. This becomes more important when working in exposed locations where wind can blow the shroud away. Push is only essential when running a bead vertically. Mike
-
Expert Village is another term for dong meat.
-
LOLS A Light filter would be good.. those light frequencies are still harmful over cam.. just not very intense
-
@aakuhlmann deeper penetration..stronger weld.
-
a coded welder? u mean certified? im certified. tig weld titatium. no1 on here has anything on me. lay a row of dimes that are within tolerances as big as .002 of an inch
14 videosHow to MIG Weld- 2:00
How to MIG Weld : How to MIG Weld an Angled Jointby expertvillage79,064 views
- 0:59
How to MIG Weld : How A MIG Welder Worksby expertvillage41,887 views
- 1:52
How to MIG Weld : How to MIG Weld a Puddle Jointby expertvillage218,484 views
- 1:35
Welding Basics: Techniques for Tig, Mig & Arc Welds : Push & Pull Technique for Weldingby expertvillage136,425 views
- 37:28
Basic MIG Weldingby UCITLTC449,354 views
- 3:40
How to Run Good MIG Weldsby TheLightningStalker26,278 views
- 4:12
Removing a broken bolt using a welderby ultimatehandyman9,716 views
- 2:42
How to MIG Weld : How to Fill in Holes with a MIG Welderby expertvillage135,356 views
- 4:18
flux coreby basis1305350,914 views
- 1:52
Learn How To Weldby boobe2007222,677 views
- 1:22
Arc Welding Tips For Beginning Welders : Running a Bead of Weld When Arc Weldingby expertvillage609,087 views
- 0:44
MIG Welding: Mig Welding, Pull Techniqueby learnhowtoweld114,632 views
- 4:10
MIG Welding Basics for Farm and Automotive Repairsby nielsmiller89,180 views
- 1:55
Mig Welding. Tacking and laying a weld bead.by learnhowtoweld117,041 views
- 0:59
Learning to Weld DVDby skoffroad403,871 views
- 3:00
MIG Welding: Mig Welding, Push Techniqueby learnhowtoweld281,348 views
- 8:47
Gasless Mig Welder, Part 1. Mig welding and gasless mig welders.by learnhowtoweld44,188 views
- 10:15
MIG WELDING by EVELYN C LEWIS-- MY FIRST WELDING LESSON, PART 2by leoniagirl11,393 views
- 0:37
How Not To Weld By Neil And Jonnieby NeilandJonnieinLIT23,325 views
- 4:05
Mig Welding - Short Arc - pushing vs pulling vs Spray Transferby weldingtipsandtricks43,474 views
what a lot of assholes, if you could do better why watch the videp?
charleyfarley321 3 years ago 9
actually if you wanted a narrower bead with deeper penetration you would pull. and who doesn't like deeper penetration.
aakuhlmann 3 years ago 5