XF200 JP/FMF CUSTOM EXHAUST PIPE

http://xf200qlinksupermoto.blogspot.com A custom muffler for the XF200 QLink sumo from FMF and JP Motorsports. A custom slip on that gives the XF200 a nice performance and power boost. You are looking at the very first one sold. Go to XF200 Blog'd to get a full report on the XF200 QLINK JP/FMF Turbine Core 2 custom built for this my motorcycle.

Category:

Autos & Vehicles

Tags:

• QingQi QM200GY-B
• Qlink XF200
• Hooper 125cc
• Kreidler 125cc
• Sundown STX
• Superbyke RMR125
• Sinnis Apache 125
• exhaust
• pipe
• muffler
• sumo
• supermoto
• motard
• fmf
• 200cc

[Greg10069]

ok i hope you can get back to me soon because im buying a XF200 in two days, i want to know what your top speed was before you did all your mods to it i have to drive around 60mph to work and it would be nice if i knew if i could get up there

[flybywifi]

@Greg10069 You will have no problem doing 60 with the stock bike. I upgraded the front and rear sprockets to 15 and 44. That will give you more top end. I ordered mine from JP motorsports in San Diego. Call up Smitty. He will take care of you. I recently talked to him about going to 42 on the rear so he may have those available now too.

[flybywifi]

anyone out there want this same pipe? go to my blog and click on "jp motorsports" and then click on "contact us" and get one shipped free to your house. jp motorsports also offers a front 16 tooth and a rear 44 tooth sprocket for this machine.

[ibrmmh]

Hey I have the same bike with tons of mods what engine,intake or other mods have you done

[shoeyvoice]

I have this bike in the uk where can I get the pipe from?

[triga2k9]

@jayjay12556 bollox mate

[shannontheguy]

I'm thinking about buying this bike, do you recommend this for my first bike?

[gronet75]

hey flybywifi ,,im getting the same bike ,,and where did you get brake light ? i want to change the fat big one who comes from factory,,,thank s

[rudiferia]

This is fmf 2 for motor 2t , no 4t !!!!!!!!!!!!!

[gilessmokey]

@midgarzolon yes but i have done such a conversion. you would need new wheel with disc,caliper, hose, master cyl and brake pedal.and you would have to cut and weld and fabricate. but what for?drum brake is fine especially on the rear.

[midgarzolon]

Would it be difficult to change the rear brake for a disk system?

[everlast246]

heyy man nice bike quick question is there anything else i could do to that bike besides what you have done already

[gamerbot101]

dats a sexy bike