SRAM X0 X9 Cable Change
Loading...
Loading...
85,336
Link to this comment:
Share to:
Loading...
- 5:35Tuning a Rear Derailleurby BicyclingMag22,738 views
- 3:16Installing and Adjusting Rear Derailleurby spadoutDOTcom108,648 views
- 3:12How To Adjust Your Front Derailleurby dinand8140,469 views
- 0:21trigger x9 10v 2011 bugby Excitment4,251 views
- 0:12CK Hubby kamikazerider27,631 views
- 5:56Avid Elixir Disc Brake Bleed Procedureby SRAMtech111,475 views
- 7:17SRAM trigger shifter spring assembly x9by ian7316,838 views
- 2:50Bici - Como desmontar un Cambio GripShiftby liviston219,479 views
- 4:25Installing a Crankset on your Bikeby Bikewagon66,033 views
- 3:54How to replace a Shifter Cable on your Bicycleby spadoutDOTcom72,721 views
- 3:0216 - SRAM X0:X9 Cable Changeby chuckcam1,400 views
- 1:03XT XTR + Sram Gripshift X0 10 Speed 2011 slx tw...by fantic2649,496 views
- 2:05SRAM x7 x9 x0 9sp derailleur to 10Sp Gripshif...by fantic2610,410 views
- 0:16SRAM X.9 Triggers up shiftingby idinfinity12,177 views
- 4:39SRAM - Let's talk 2X10by Studio18646,646 views
- 0:46new sram x9 gets stuckby francisc04,605 views
- 3:03SRAM Road Controlsby SRAMtech55,053 views
- 0:49Shimano XTR or Sram X.0 ?????????by ficosk8149,728 views
- 2:20SRAM Chain Sizingby SRAMtech65,101 views
- 10:33How to adjust the rear derailleur on your bicyc...by Johnnysshop174,256 views
THIS guy
Bayplaces 1 month ago
Funny I didn't know you used a pair of wire cutters to clamp down the cable cap. For years I've used pliers to smash the cap down on the cable with mixed results. Would have never known it if I hadn't seen this video. I suck at bike repair.
Shred303 10 months ago
dosent mention anything about high and low adjustments for those who dont know how to do that, cause the chain could still be slipping off the lowest gear like it was for me until i adjusted the low scew and it was fine, so dont go messing with the barrel if u havent already done this
chrismbuk09 1 year ago
dont buy this leaver if u want ease of use i just had to replace the calbe and its not as easy as shown on this video the guy forgets to tell u that the leaver fall to bits in your hand and the leaver binds up if u dont get it just right it real peace of shit stay away
bikemancambs 1 year ago
No info on changing the cable for the twist shifters?
SirBubbaGumb0 1 year ago
if your replacing the cable why are you using an old one?? also if u've cut the cable so its not fused at the end just twist the cable the same way as the cable braiding.
CerialKarpins 1 year ago
wao more fast than shimano rear deari
Popochoclos 2 years ago
clip the crappy end then use a drop of superglue
redmonday 2 years ago
Brief for a brief job. Helped me a lot and I had no problem routing the cable in the shifter. Just takes a little patience to work it out as to the best way to do things, such is life.
upuaut2112 2 years ago
Very brief and with very little detail.
It also brushes over the biggest issue with x9 & x0 shifters, that is the unreasonably difficult task of inserting a new cable through the cable cradle. The cable has to follow a curve to get thru it and more often than not gets caught in the plastic edge of the cradle. This becomes an almost impossible task if the cable is not a brand new one with a fused end.
This is a major design flaw and i hoped to get an insider tip to do it more easily.
contactjt 2 years ago