Home Made Under Dash Car Blue LED Light In Santro India
Uploader Comments (ghpk)
All Comments (31)
-
evidently the L.E.D lights under my 96 Ford Bronco's dash are all messed up, from the way you all are talking, mine are just ran from the battery with an in line fuse and a switch witch is in the glove box, (the ground for the lights are this little metal bar under the dash)
-
are these wired to your door lights or your cig lighter? I would like to know if i can wire my LEDs to both so they turn on when the door is opened and when the car is on
-
where do you keep your swtich ? and how long and how much did this cost you? cus im thinking about doing this to my car too
-
hi can u tell me how u wire these cuz i just blew out my fuse the other day lol. but i bought the led package from ledglow.com
-
@ghpk hehe,DIY must certainly feel better i guess !!
-
i wanna make one to put under my car
im doing the same as you with red leds and some computer optical mouses for the inside of my car, i have only one problem, after i place the leds all over the car interior to what should i connect them? just to the car battery or to another source of power like a small 12v battery?
need advice opinios and new ideas,please some one reply
Faria3470 11 months ago
@Faria3470: you can use the car battery itself, as L.E.D's consumes very little power, you can run them off your car battery without any problem.
to run the L.E.D. lights using car better, you need to use 3 L.E.D. and then one resistor
this way you'll need lots of resistors.
search google for "LED series/parallel array wizard" and you'll get a calculator for the resistor value needed
increase the resistor value a little to be on safe side.
ghpk 11 months ago
could you tell me how you set this up? i would love to get this done in my car. just got an '05 accord
flyingdonkey121 1 year ago
@flyingdonkey121 hi, if you don't know how to solder L.E.D.'s best and safest option would be to buy a Ready-made L.E.D. strip from ebay, if you know how to use soldering iron and work with car wiring then you can make a L.E.D. strip by soldering 3 L.E.D. and 1 resistor to any number you wish.
ghpk 1 year ago
@ghpk
can u turn this off and on?
shaochiavang 1 year ago
@shaochiavang Ofcourse, I have used the empty slot for on/off switch.
in higher model this space was used by defogger button so i installed that switch for my L.E.D.
I also have 2-3 more switches will make a video and post in a few days for sure,.
ghpk 1 year ago