Magnum XL 2 stroke 4cc nitro engine

it sounds more like a 4 stroke

Category:

Entertainment

Tags:

• magnum
• XL
• stroke
• 4cc
• rc
• nitro
• airplane
• engine
• test

[9unuunu]

it's a 25. size = 4cc

[9unuunu]

4cc

[9unuunu]

no, not completely...

[9unuunu]

hmm....good luck with your stopping technique ;)

[9unuunu]

am incercat si asa..dar incepe sa friga dupa aprox 30 secunde de functionare;)

[9unuunu]

=)) not really ,no

[thenitro15]

hey when it wont shut off just stick your finger's in the propeler

[nitromelvinz80]

can you sell this engine to me. if you sell contact me melvinantothomas@gmail.com

[Bgee134]

That's bitch! I've built mini model steam engines, I'm thinking of doing my first gas model. How much did that little set up go for?

[sezginatik]

nice video

[aeromodelisme45]

Dangereux ! à ne pas faire !!! je ne vois pas l'intérêt...mais sinon il tourne pas mal.

[fairyheli2]

thats one hell of a pocket fan

[michnet76]

That's on game camera operator, what if that engine slipped out of his hand? We have a rule at our club, don't stand in front of a prop at WOT or directly to the side, always position yourself behind it... FWIW.

[spyder000069]

Sometimes it takes a couple of gallons of fuel before they start idling well. I've had many friends rush the break in on these and lean them out to stay running and they burn them up quick. Put a good O.S. #8 plug in them and run them on 15% with the high speed needle set rich with a 500 rpm drop at WOT and you'll be golden.

[spyder000069]

Just set the engine at idle and pinch the fuel tubing and it will shut off. I've had air leaks in magnum 2-stroke carbs due to bad orings so try replacing that and make sure your idle speed screw (usually on top of the carb) is backed out far enough to let the carb fully close. I've had great sucess with magnums after a little tweaking. They do take much longer to break in than most engines.

[yittymitty11]

@9unuunu looks more like a .40 size motor not 4cc