Coolest Running HP Pavilion Laptop in Existence?

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
26,706
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Nov 6, 2010

This is a video of what it actually takes to make an HP Pavilion Laptop run at normal temps. The GPU on this one idles at 32-33 Celsius. It maxes out at 44 Celsius after long stress tests are running, I cannot get it to go any higher, the best part about this mod is the fact that once the stress test ends it goes back down to 33 Celsius within 60 seconds. Under normal operation without mods it takes much longer for the GPU to cool down. This mod also dramatically reduces heat from the CPU as well.

I have not made my base yet however it will only need to be 3/4" tall, I am thinking I will put some 3/4" thick double sided insulator tape and just leave the cover on the bottom side and stick the other side to the bottom of the laptop under the lcd side.

I have it so the fan pushes cool air up into the laptop directly hitting the GPU.

Overall very good results.

Email me if you have any questions.

  • likes, 4 dislikes

Link to this comment:

Share to:

Uploader Comments (ThePcPitstopAvonNY)

  • wow ! so all i have to do is make a HOLE in my laptop and hook a GIANT ass FAN in there ... why didn't i think of that before ... You're Genius !!!

  • @Seiferzed JUST A NOVELTY VIDEO, of course we do not cut holes in our customers laptops.

  • What AMD processor does this have & what speed, as in GHz?

  • @Bort1965 it has a 1.8ghz dual core cpu TMTL58 I believe

  • I researched the DV 2000 Van, and that Fan Just Pushes Air Sideways, Its a Circular Designed Housing , and actially blows Air sideways, I would Opt, for a 50MM or 55MM a 60 mm curved Fin, it will stick out, have to get a Fan Shield ,, Perhaps, one can Install a connector to the Power 5 Volt inside the case Jump off the Fan and can try different Fans, for results.

  • @calforman actually this blows very hard when removed from its original heatsink, it is the heatsink that makes the fan pull air from the side.

Top Comments

  • hahahaha! you absolute legend that fan made me laugh so much! well done though great mod!

see all

All Comments (68)

Sign In or Sign Up now to post a comment!
  • COOL story bro.

  • UM OK OSOME ONE TELL ME LOL WHATS GOING ON I HAVE A HP PAVILLION G6 AND IT RUNS AT 18C ON CORE 0 CORE 1 AND THE HDD SO I THINK I HAVE THE COOLEST LAPTOP MINE CAN GO TO MINUS 125 STRANGE

  • What is the size of the fan that you put on the botton

  • too noisy its like am about to board a plane!!

  • i don't like USB cooling pad i want something with run with power A/C . Can you give me idea how to make power adapter cooling fan give me some advise. thank u for reply me back. I really appreciate it.

  • @shuan44 ......

    I would take off the Breathing tape on the Plastic that holds down the Door to the Hard Drive...

    Also you may Consider drilling tiny air holes in the Plastic, ( Removed from the Computer) to allow more air to get in there... ... after that consider a Laptop Cooling pad,, Lot of them on the market ... that are streamlined..

    Im working on a new miniature refrigeration method

  • @calforman hey i have DV2700 notebook i have changed my cooling fan but my hdd really gets hot what could be the problem here is the link to see CPU Temp

    i have dv 2600 i replace my cooling fan and my hdd gets really hot wht should i do now here is there result of my system info if u please look at and tell what to do. here is the link to look at the system Temp

Loading...

Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more