Audi UrS6 Automatic with GT2871R (running like a crab)

with stock 'EM,Exhaust,intercooler.Waiting for all stuffs to be arrived.It seems there's some problems on the setup.

Category:

Autos & Vehicles

Tags:

• PICT0004

[Beivakongen]

Have you got all the stuff now? I`m also thinking about the same setup.

[popdemonic]

@Beivakongen

Sure,I almost got all stuffs in.going to have FMIC on my car soon.Recently,

i was experiencing boost issue.I still can't fix it.on the next few months,

I will do the tranny conversion by EDU box.

[popdemonic]

@Beivakongen

I have 044pump laying around with the basket but need to get the aftermarket check valve.I can't bear with the whining of 044's.FMIC kits were in.I will need everything to be buttoned up.I also cured the boost issue from put the 2.75"or3"(sorry i forget the right size.) reinforced stainless ring inside the 034 silicone intake boot.It comes to collapse under high boost since the boots is too soft especially under heat+high vacuum.

[popdemonic]

@Beivakongen @

I have 044pump laying around with the basket but need to get the aftermarket check valve.I can't bear with the whining of 044's.FMIC kits were in.I will need everything to be buttoned up.I also cured the boost issue from put the 2.75"or3"(sorry i forget the right size.) reinforced stainless ring inside the 034 silicone intake boot.It comes to collapse under high boost since the boots is too soft especially under heat+high vacuum.

[olioli917]

hey can you post a video when its all done, i'de love to see how it turns out.. thinking about the same setup. hows the gt2871r ?

[popdemonic]

@olioli917

sure,will do.GT2871R is fast spool up but it surges at lower RPM with higher boost.

[flexodon]

mine car does 2.5 bar according to the BC :)

[AHQ456]

How you tuning your boost to 2.4 bar? My one just 2 bar?