AS350-HeliArtist-T-Rex 450 SEV2

This is a small clip of me flying my new AS350 ASTAR on my T-Rex 450 SeV2.
Flying weight 2.1 lbs.

Category:

Entertainment

Tags:

• Heliartist
• t-rex 450
• align
• sqirrel
• helicopter
• rc heli

[PaulGrc]

I never fly on iddle up mode on my scale helis, all my curves are adjust to have a smooth transition.

Thank you for the complement

[PaulGrc]

Thanks. I have the DX7 radio. pitch settings at low stick is -6 at Mid +3 at High +10 Pitch curve L=0 1=42 2=74 3=85 H=100 Throttle Curve L=0 1=77 2=96 3=98 H=100

[PaulGrc]

Yes I am, I already have it but not install on that AS350 yet.

I tested it on another 450 and I had a hard time with the torque for the tail so I will have to get a bit larger tail rotor or increase the tail rotor speed.

[PaulGrc]

If you intend to fly scale do consider a larger size heli as they are much easier to fly slow and more scale. The 450 size are a bit too heavy to slow them down safely so you work much harder.

[PaulGrc]

I have my T-Rex 500 on float at this time , but I would like to build an EC-145 for it but The Torque tube is a problem now as I dont want to convert it to belt for the EC-145. So waitting to see if they will make an adapter for the 45 deg raise tail.

[PaulGrc]

It should fit the Belt CP V2 its very close to the Rex 450 v2 .

try to add weight to bring your heli to 2.1 pound and see how it handles it.

That would be my only concern because the motor might not be powerful enough, but you never know it might be just perfect.

[PHeMoX]

@PaulGrc Are you flying in normal mode here or in idle-up? Great scale flying!

[farleymcad]

Hello I saw your heli flew very smooth as you do that? what setup you did?

[chiavernwei]

Are you planning on putting a scale head?

[Gigler43]

I am new to flying helis but I enjoy it. My ultimate goal is to fly in the same manner you have in this awesome video. I intend to build a LAPD rel=plica of the AS 350. I am inspired.. Thanks for sharing.

[feliu1968]

Hey Paul good job and great scale flight.

Do you have any work done with a Trex 500?