new design trying for lower amps

i'm drawing 7.86 amps when i plug in to a 12v battery at about 12.9 volts 101watts i figure with this smaller design i will pull fewer amps i tried it i am pulling less amps but production is almost nothing

Category:

Science & Technology

Tags:

• hho
• hydrogen
• hydroxy
• fuel
• cell

[josejir]

To much neutral absorb the performance.

[stronglungs]

i have an idea on how to wire these thanks to coogrrrr but i'm gonna have to get some better spacers and it will require some thinking and working but please see my other video

[pgpeachess]

inside a 2" pvc pipe, i use a group of ss washers like you have except, they are surrounded by a ss sleeve, not touching themselves, of course, since the washers are cathode and the sleeve is the anode.

[stronglungs]

i would imagine with this many ss washers i would of seen better performance but never give up i'm gonna try everything i have moved on to another project but my washers still wait for a final fate

[LinuxUser269]

i get better production out of a 18v rechargeable cordless drill battery than a 12 auto battery .

[stronglungs]

how long will that 18v battery run one of your units i have heard of it but how do you hook it up to your cell

[0987654321mnbvcxzmor]

you only need 2 volts to create electrolisis of water so having alarge number of seperate cell in series is more efficent use of power.Reduce the resistance by increasing the surface arear of the electrodes and in close proximinity to each other all the best

[cricketol]

try using a nylon bolt

[novachevyguy]

here's an idea , go smoke up some more shit and then make another video...

[MaanJattFarms]

I can't see what or how you have spaced the electrodes.

There are no gaps between the plates for the produced HHO gas free movement. See other plate designs showing produced gas movement flowing.

[spaan14]

if the bolt is ss then he will short the power.

use a plastic bolt.

[TheBrittBoy]

stainless screen wire stacked and spaced then rolled up like a cigarette, less amps more hho, best i have ever made, awesome results!!!

[RisingSun350]

I hate to say it but its a bad designs... only because the gas that would be forming isnt.

You need to create spaces between the plates,washer,cups etc...

without this you have no production at all.

Stainless center bolt... chuck it...go plastic...

next i would look into washer cell designs or cup designs I have tons....

the best way to get on the right path to good cells are check out others and make your own.... if you have questions let me know... more that happy to answer them or help

[ppfeifdog]

stronglungs, you have about8 gaps?? 12.9/8=1.6125 volts,,,,,your right on the border, try about 1.8 volts per gap......much beter production I think.....let me know.