Laminar Jet Construction - Part 2
Loading...
Uploader Comments (zacharysc100)
All Comments (9)
-
What flow rate or outlet velocity did you get through the half inch outlet?
-
I do have one additional thought, perhaps you've already experimented with it so I'll ask you in an effort to save me some aggravation. Is it possible to shape the external flow? All I've ever seen so far are round, cylindrical flows; do you think that if the tube were square as well as the nozzle that the flow (rod) would come out as a square tube?
-
I, too, am impressed with your detailed videos. I have been working on my first laminar flow with very eratic results. Each time I turn back to the net and end up on You Tube; this time I found your tutorials and can see precisely what I've been doing wrong in various aspects of the configuration.
-
Hello Zach, I saw many you tubes with the same design flaw in which the water exits the straws and returns to a state of confusion in the head space prior to fighting for the nozzle exit. The water is no longer layered. All these units do give the appearance of laminar flow because of the slow feed but in reality the nozzle needs to be the same size as the packed staws or the straws need to be packed in the shape of the nozzle you have created. Tom
3:48
Laminar Flow Fountainby luckydon195515,590 views- 1:11
Laminar Water Jetby ponddude120,023 views
- 2:13
homemade laminar flow nozzleby jdub8166,517 views
- 0:20
water fountainby digitelau18,525 views
- 0:37
My First Laminar Flow Deviceby FonrusNoma17,466 views
- 0:32
Laminar Water Jet Fountain MK2 - Light Effect - Duskby borgijoe3,961 views
- 1:29
Laminar Flow 2by catwebster13,736 views
- 2:10
Can Water Cut It? Bowling Ball!by CanWaterCutIt211,670 views
- 3:43
RGB Laminar Nozzle Testby magicmastera20,948 views
- 1:04
Laminar Nozzle Cutter Test 1by portojbc10,147 views
- 1:19
Laminar flow vs turbulent flow (smooth vs corrugated tubes)by hrsheatexchangers27,452 views
- 1:03
Parabolaqueous - Interactionby zacharysc1002,268 views
- 1:46
Laminar Flow Stirling Engine V1.1by mowerofdoom64,791 views
- 9:51
The Aurora - Crystal Focus 4.3, 10W Purple RGBA LEDengin Lightsaber with Clash/Flash effectsby LiquidMetal111116,991 views
- 1:02
Laminar Nozzle Laser Light Testby liteglow20006,086 views
- 4:57
AE 0.1CC Diesel Model Engine Microby rcdieselrc84,812 views
- 0:22
Laminar Flow Fountain Cutterby pmolsen16,961 views
- 4:06
Laminar vs. Turbulent Flowby laskoc7,588 views
- 0:57
Water Jettingby GikenAmerica19,874 views
The max height and distance of the laminar stream I was able to achieve with these jets, was about 6'high and 8'out, You can figure the velocity of the stream by simple trajectory physics. The pumps I was using were just simple fountain pumps from Home Depot around 600GPH
zacharysc100 1 month ago
Hello Zach. Thank you for a thorough and competent series of videos on the Laminar flow nozzle. I have been working on one and your videos will help me avoid mistakes. I particularly like the cylinder for evening out pressure variations. I wonder if it would work as well with a four inch pipe?
MalcolmDyer 9 months ago
@MalcolmDyer : Yes it does work on smaller pipes,, But the biggest good laminar stream I could achieve with a 4" was around 3/8"
zacharysc100 9 months ago
Why not invert the the output valve so sharp edge is last thing water sees?
evdeals 1 year ago
@evdeals: That is exactly how it works.
zacharysc100 1 year ago