BIESSE ..."ROVER 30" CNC MACHINING CENTER 2001

Working cap.: X-Axis = 174.75" (4,438 mm), Y-axis = 49.2" (1,250 mm) using the front stops. Using the back stops: Y-axis = 65.4" (1,600 mm) for boring & 61.8" (1,570 mm) for routing, Z-axis = 10.8" (275 mm); max. workpiece height: 6.7" (170 mm) max. programmable speed: X- and Y-axis - 230 FPM (70 MPM)and Z-axis - 98 FPM (30 MPM).
_ Equipped with: (20) Independent vertical boring spindles forming a L-configuration with (10) spindles on the Y-axis and (10) spindles on the X-axis; inverter controlled variable spindle speed up to 4,000 RPM.
A total of (8) horizontal spindles provide horizontal boring capabilities on all four edges of the panel, (6) on the X-axis (3 in ea. direction), (2) in the Y-axis (1 in ea. direction); head is arranged to accommodate (2) operating units.
Options included: (1) 10.5 HP vertically mounted HSD LH/RH router, inverter driven 1,000 - 20,000 RPM with max. torque from 12,000 to 24,000 RPM, equipped with ISO 30 adapters. 8-position "Ride Along" Automatic tool changer for "on the fly" tool changes.
Work area with: (8) Adjustable panel supports and lifting bars ea. with: (3) Vacuum cups per support; each support with metric LCD display for quick positioning of vacuum cups & support rails and with value input from controller according to part size and machining required; setup for (2) independent working areas with double boring stop unit equipped with: (8) pneumatic frontstops, (4) pneumatic side stops and (4) add. central stops; front row & central stops with "quick fit" mushroom clamps for clamping of small or awkward shaped parts; each work zone with: (1) Quick Connect vacuum outlet for custom vacuum fixtures.
Separate control console with: "XNC" Controller, 32-bit 486DXE-100 MHz processor, 540 MB hard drive, 14" color monitor, international keyboard, soft touch keypad & industrial mouse, RS-232 serial port and (1) 1.44 MB floppy disk drive; PC operating system for Windows operating system 95, 98 and NT; programs can be transferred via diskette or downloading by wire is possible; built-in 1,500 W air conditioner for constant temperature & dust free environment.
Includes: 11 KVA Stabilized Auto-Transformer for voltages between 220 - 600 volt, 100 cbm/Hr BECKER vacuum pump and automatic "forced" lubrication system for guides & ball screw; emergency stop rope & pressure sensitive safety mats that will instantly place machine in "pause cycle" when stepped on; sound absorbing protective head enclosure with debris curtain around bottom edge.
$39,000.00
Replacement cost: $153,000.00 (approx)
FOB: NY.
This machine is offered in good running condition as taken from service and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.

Category:

Science & Technology

Tags:

• cnc
• router
• pod
• and
• rail
• biesse
• homag
• weeke
• cr
• onsrud