Turnigy FlySky iMax Eurgle 9X Switch Error

I get a lot of emails from people who have bought the now ubiquitous FlySky radio in one form or another and who find that all it does is beep and display a message that says "SWITCH ERROR!"

Here's how you can get rid of that error message and actually start using your radio.

Category:

Science & Technology

Tags:

• FlySky
• Turnigy
• Eurgle
• iMax
• 9X
• radio
• RC
• transmitter
• 2.4GHz
• error
• problem
• beep

[wookswealthy]

hi i am looking to get one of these and was wondering if it will bind to spectrum rx????



[RCModelReviews]

@wookswealthy No they won't. In their standard form they will only bind with the Turnigy 8 channel, HobbyKing 6 channel and other V2 FlySky receivers. That's not a bad thing -- those receivers are very cheap and offer better interference rejection than any of the Spektrum DSM2 equipment.

[ripper9191]

hey bro i have a big question because i have one transmitter but is mode1 can i change the control to make a mode2?

[RCModelReviews]

@ripper9191 Yes, changing modes is pretty easy and I'll be doing a video showing how to do this very soon. It's just a case of moving a spring and the ratchet from between sticks and then selecting the required mode in the menus.

[JurrePs3]

How To fix this even easier : watch?v=Z4zGRr86Esc

it was in the manual!

[VETTE811]

THANKS FOR ALL YOUR INFORMATIVE VIDEOS... I HAVE THE FLY SKY 9 AND WAS WONDERING WHAT YOU WOULD SUGGEST THE DUAL RATES AND EXPO SETTINGS TO BE SET AT THE HIGH RATE AND LOW RATE.....  THANKS

[metal4ever1965]

when i operate the throttle, my flap servos move up and down, and i have them correctly plugged in. also, my landing gear wont open no matter what toggle switch i use. pls help

[inthetubedeep]

G'day! I have been using the JR9503, and just got the Turnigy 9x as a back up (or maybe primary Tx since I've been losing signal over the ocean and losing planes!)- looks like a great radio-- but I can't figure out how to program it! I am trying to assign the Aux3 pos switch to operate flaps, any idea!? Thanks!

[KardanAutos]

Thank you very much! Just got my turnigy 9x and was almost about to panic!

[000006rapture]

@xjet Thanks for your speedy reply, Bruce. I'm about to order the USBasp AVR Programming Device from hobbyking to do the flashing of the radio.

[xjet]

@000006rapture Unfortunately the JR uses different channel assignments (ie: the JR throttle is the 9X aileron and the JR aileron is the 9X elevator) so it's not really practical to use them together unless you reflash the 9X software to the excellent ER9X freeware. I'll be doing a video on performing this reflash in the new year.

[000006rapture]

Hi, Bruce! Question for yah? Do you think that my JR SX600 is compatible in master slave trainer mode with the Turnigy 9x V2 I just got from hobbyking with the normal jack cable. I do not want to burn out anything? Thanks in advance.

[TheStevestewart23]

thanks saved me alot of time trying to find the problem

[polymeb]

Gracias idolo!!!!

[EduBrasil2007]

obrigado por sua honestidade. fiz o que você explicou e deu certo, muito obrigado. continue com vídeos assim. abraço, edu