Bottle Jack Tip: Purging Air From the System

Ken Siverts gives you a simple tip on how to look like a repair professional to your customer.

Category:

Howto & Style

Tags:

• norco
• lifting
• bottle
• jack
• ken
• siverts
• tip
• purge
• air
• hydraulic

[kahledyouth]

thumbs up if you count twenty times.

[12inchinthegrave]

worth watching for the tash!

it should have its own series.

[evilhank666]

thank you

'

[jheetman]

@jheetman my bad, i do see that now. second piece is just an extension.

[KingOfTheClutch]

@jheetman if you look, you can see that it's got 2 pieces.

[jheetman]

umm, that pump handle was only one piece. maybe dual function, but still only one piece.

[underpants1965]

I used one of these to move a wall that had been hit by a truck, got it back about 4'' to where it it used to be, marvellous bit of kit.

[ICUC007]

I have a cherry picker/shop crane. Each pump only rises 1/2 " or less. seems like it should raise much more. Do you think this means air in system, or not enough hydraulic fluid? Thr piston or ram on this thing is probably about 2 ft long. should i give it about 60 pumps to purge the air? It seems to hold in position once it is pumped tho.

[J0Boa]

Thanks a lot for the video that took care of my jack !

[srp960]

Thank you for this tip. Is the same procedure used on a 3 ton low profile jack which has two large screws, a release valve and an oil refill?