Dynamis, Programing a Loco

Trying to explain how to programe a loco with the Bachmann Dynamis

Category:

Entertainment

Tags:

• Dynamis by Bachmann
• Dynamis controller
• Model railways
• controllers for model railway

[nev6363]

thanks for showing me how to do it :-)

[howarth004]

@nev6363 Glad to be of some help to you, it is a good system for the price

[taffmerthyr]

Very helpful video, I dont think I would have ever understood the manual, thanks to you I have made a start and got one loco running...what loco Decoders do you recommend..Im running Heljan, Hornby and Bachmann

[howarth004]

@taffmerthyr Glad it was some use to you, I am the same with instructions from a book , I struggle, as for the decoders I also use Bachmann and Hornby with no problems

[Vlinefan]

thanks for the help just having a look at the moment

[howarth004]

@Vlinefan Hope it helps

[maciekskontakt]

Dynamis programming sucks like hell. The manual is incorrect (Bachmann! hire proper people who know how it works and know how to write it). The manual says [BKSP] to delete old address. It is BS - it is used to reset digit address to 0. The manual to program accessory decoders is non-existent (and yes I figured out how to program Digitrax DS52 with Dynamis and documented it). My Dynamis does not program Bachman locos (???). I used old good E-Z Command Control changing address took seconds

[nkp754]

@samster412 if its like 10 min after starting the loco it has time delay if you dont use the controller after starting the loco it turns the power off to the track there is a setting you need to change in the controller I had to do it to mine

[howarth004]

@Vlinefan they are very good, but to control points and other accesorries you will need to buy the pro..I do not have that...lot of good one`s out there now