Low voltage electrolysis - secret revealed

Best production of low voltage electrolysis.
Showing you the results of 5vdc using pure tap water only.
This time, using the resistor with 7 ferrite rods wound in #23 magnet wire.

The results : Better production than using 12vdc with soft impact of voltage current in the cell. making the cells maintain the quality and will last longer and clean.

Category:

Science & Technology

Tags:

• HHO
• Electrolysis
• Hydrogen
• fuel
• cell
• water
• electrolyzer
• alternative
• hydroxy
• daniel
• dingel
• stanley
• meyer
• stainless
• steel
• tube
• car
• hydrogen
• hybrid
• free
• energy

[irondmax]

good job

my inductor is made of welding rods and house wireing.

19 rods of low carbon content and 200 turns of rubber covered 12 gauge wire.

200 turns = 100 for the pos and 100 for the neg.

each rod is coated in electrical tape.....

the inductor is designed to hold the energy pulse and release it slowly....i can use the windings in different ways

[2bigHybrid]

@irondmax Thanks..It's a never ending learning process..Next time will use my instant pwm and make another inductor using a much bigger wire and longer rod like yours..

[djdsfhakdfhlksdhklf]

Are you there?

Listen!

Remenber about joe saing that he wont ignite fire, and the his joe cell gas only wold turn metal into blub of melted metal? -is fact in never released video.

Now INTERRELATION WITH BIOGAS GENERATOR:

Why keep bubles (almos the same) receiving more bubles, and keeping growing sambe bubles into biger bubles, for almost 3 days?

Thats it - Re-energization, and gas circulation.

I tiny tube inside bluble, with redirectional very very slow flow of air back under..

[2bigHybrid]

@djdsfhakdfhlksdhklf Hello,

Joe Cell, requires a seeding process of water, It's just like our body that needs to be trained..building the energy called "Orgone" in 3 stages...the hydrogen implosion as a retarded chemical reaction. I have not tested a Joe Cell yet.

Biogas - comprises methane and carbon dioxide from the digestion or fermentation of biodegradable materials such as waste, manure, plant materials. We can store the biogas or Hydrogen but the concern is our safety.

[joebulatao]

Ang galing nitong HHO set up mo Ian! But it is making me confused. How do you break the water without any electrolyte and with only 5 volts?!? And the ferriite rod wound with magnet wire I assume is just a resistor dropping the 12 v battary voltage down to 5v. Milagro ! Anyway,keep up the good work buddy!

[2bigHybrid]

@joebulatao

Hello Joe...This cell is very strong at 12vdc with only tap water..umaabot ng 40amperes, kaya I tried to lower the volts with my resistor..the factors that contributed to this cell's performance. ,. 1.-There is no neutral plate, all of them were tempo welded to create a higher amps and lots of H2 only. small bubbles. 2- the gap/tube is very close, 3-all tubes roughly sanded to allow bubbles to come out faster. 4- This was my old cell undergone many test conditioning. Regards Bro.

[Bourne246]

sir tanong lang.. ang inductor ba na connect ba directly to the power supply? :)

[CHIBA280CRV]

Hello,i think is an awesome electrolysis process , but i can not see a damn thing, can you make the video over with a HD or at least something with a higher reslution? really would like to understand visually what you wrote..thanks please try ...the pixels were killing me..

[JBC814]

Upgrade to HD, very blurry video.

[rickm09]

long ways to go my good man that production is nothing special even on the low side im not trying to put your work down but your title is waaaayyy off please dont post what you cant back up

[dilik2005]

@irondmax I know that linear electrical energy dont make inductive effects, so it is pulls, in addition I don't know any battery making 23vlt 10 amps, I think I need to make a parallel resistant, so my load could work!

[irondmax]

@dilik2005 are you useing a pulse or just hooking it to the battery?

if just attaching the wire to the battery...you just made a magnet...thats all

there must be a pulse.

to many pulse or just a battery..inductor will melt

[dilik2005]

I have question can u make a real deal of (1/R)=1/R+(2/R)+(3/R) ..... n/R

i mean parallel resistor theory for lowering the resistance of out put???

[dilik2005]

@irondmax hmmm! 20 amps! 12 volts! theoretically V=I*R so if you have 12 volts=20amps*R that should be roughly 0.6Om??? how you will get that low resistance! in adition I tried to get 8 amps with 20 volts, and use to get electrolysis! worked fine! but when I put load to my coil it didnt worked, I mean load works for 23Vlt 10 amp, but my coil made weird sound and nothing>!?

[irondmax]

@dilik2005 my buck converter uses 12 volts and a pulsed 20 amps....equals around 3 volts at the cell....amps should be pretty high.....heat in the cell is kept low....no boiling of water....less wasted energy...many people have tried this with good results....

resistance of the wire is low.....adjust frequency until no heat is in your coil...best use of the power, put into the cell

[dilik2005]

@irondmax yes but what is the amount of energy u r spending? and what is resistance of coils!?