Installing Self-Adhesive Vinyl Floor Tile
Uploader Comments (mazerwholesale)
All Comments (19)
-
can you lay this over existing 1 inch square tile floor in a bathroom or will it need to have leveling compound put over the old tile first?
-
?... I have similar tiles on my floor and because my puppy is still in the training stages, he's constantly do he's business on the floor, between that and me mopping it has caused the tiles to raise losing its sticking power. I plan on re-doing the floor but what can I use to prevent from raising or water going through?
-
I've seen self-stick tiles work well on top of linoleum or vinyl, but they seem to peel up from plywood, at least in wet areas, due to the swelling and contraction of the plywood. Is there a sealer that will prevent this problem?
-
I'm going to be pulling a self-adhesive tile off an existing self-adhesive floor and lay down a new one over it. I have 2 questions. What is the best way to get the old tile up? and what is the best cleaning method to use over the old floor that exists and will have old adhesive residue on it? Thanks.
Thank you for your question. The grooves between the ceramic tiles are going to be a problem and will need to be filled. Otherwise the vinyl tile you put on top will sink into the grooves. Sorry, it's not going to work unless you get some floor lever.
mazerwholesale 1 month ago
In my experience wet mopping is fine but you want to dry after mopping. If the tile is installed properly (no spaces in between), you shouldn't have a problem with our product. Thank you for the question.
mazerwholesale 4 months ago
Cool Video. Good advice.
SplogMan 4 months ago
@SplogMan Thank you for your comment. Just about anyone can install their own self-adhesive floor tile. It's a great feeling of satisfaction to see the finished job. It looks great, it's cheap and lasts a long time.
mazerwholesale 4 months ago
Thank you for your comment. I've never needed to use anything to enhance the bond of the self adhesive tile but I've heard great things from one of our repeat customers about Henry's 336 Bond Enhancer. She buys it a Lowe's and raves about it.
mazerwholesale 4 months ago
Thanks for your question. If your tile doesn't peel up so easily by hand you may need a stiff putty knife or razor scraper. If it's still really tough, you may need a heat gun or propane torch to warm it up to reactivate the glue.
Before trying to remove the old glue residue, I would test a couple pieces of the new tile on the already-sticky surface. Let it stand overnight and check adhesion. If you're not satisfied with the results, you'll need to get acetone to remove the old adhesive.
mazerwholesale 5 months ago