8-11hp Tecumseh Carburetor Linkage Configuration

In this video I show the proper Carburetor and Governor Linkage configuration on the 8hp to 11hp Tecumseh snowblower engine. Visit my channel for more repair videos; http://www.youtube.com/user/donyboy73?feature=mhw5

Category:

Howto & Style

Tags:

• In
• this
• video
• show
• the
• proper
• Carburetor
• and
• Governor
• Linkage
• configuration
• on
• 8hp
• to
• 11hp
• Tecumseh
• snowblower
• engine
• snowking
• chase
• neige
• souffleuse
• cycle
• carb
• carburateur
• petits
• moteurs
• small
• snow
• winter
• temps

[mkmnk]

Thanks for all the informative videos.

I've found it a good practice to snap a couple pics with a digital camera before I do disassembly. Even if it seems obvious at the time you take it apart, if some time passes before reassembly its easy to forget where things go.

[donyboy73]

@mkmnk yes that is a good idea, i do that from time to time

[19nywf39]

I just finished rebuilding this same carb--thanks to you--and I just finished connecting the linkages back up correctly-again thanks to you. Thank you!I sure appreciate and enjoy your videos.

[donyboy73]

@19nywf39 thank you

[starakobieta]

can u make a video of how to rebuild a toro ccrpowerlite i dont get how to put the connectrod berrings back in please i work on bikes and mowers and small engines im 15 u live pretty far from me i live in lansing il over by indiana hopeing to meet you when im older

[donyboy73]

@starakobieta if they are loose roller bearings use a hard grease to hold them on the crankshaft

[CorsaAGSi]

@brubakes i think most do it by ear .

But you can hook up a tachometer for the rpm.

[raj62980]

Thanks for all your videos!! I have used a lot of your videos and learned a lot!! I have the same engine on my snow blower as in this video, and I basically used your videos to replace the fuel line, carburetor and put in a shut off valve after my snowblower failed to start. However it still won't start and I don't think I have compression because I did the thumb test and my thumb wasn't being pushed off the spark plug hole.  Don't know what to do now.

[brubakes]

How do you know when your idel and rmp screws are properlly adjusted?

[qlty70]

Thank you Dony watching your videos helps a lot.

[lt1tyrell]

Great info thanks! So why does the throttle linkage have so many different holes in it?

[MrDogshit64]

Thank you , I used your viedo to repair my linkage ....Perfect !!

[2314Raindrop]

Also now that I have it running like a champ how do I know it is running on the correct a/f mixture. It doesn't smoke and doesn't miss but how do I know if its running a little lean? I simply left the settings the new carb came with.

[2314Raindrop]

Hey man thank you so much for this video. My Simplicity 870 was not running so I put a brand new carb on and the thing would idle fine but I couldn't get it to increase engine speed. I thought I was screwed until I found this video and learned I simply connected the linkage from the governor arm into the wrong whole on the carb. I also learned what all of the screws do. Thanks a million!

[spettro9]

Where is your accent from?

so interesting..?

Upper Peninsula Michigan..?

greetings from Jersey (the newer)

[judgebean67]

Nice video, Thanx man!