integra gsr 0-100

my gsr integra from a dead stop bone stock more vide soon to come with my headder intake exhaust ecu stage three clutch flywheel and pressure plate :)

Category:

Entertainment

Tags:

• gsr
• integra
• redline
• fasst
• racing
• 0-100

[touwish]

dayem, those are some long gears, is that a ls tranny? first gear goes to 45, second 75 third almmost 100?

[madracer53]

nope its a gsr tranny and it redlines that high because of the dual over head cams which allows the engine to spin that fast, and vtec which allows it to still have power at that high of an rpm. vtec is varial valve timing by the way.. it turns on at six thousand rpms and goes to eight and a half and when vtec hits it turns the second dual over head cam on... other wise there is only one on...listen for the change in tone at six thousand rpm.

[trojantrackstar24]

Why does your vtec engage at 6,000? I have a 1990 Integra with a B16 swap with a virgin ecu and my vtec engages at 4,700.

[madracer53]

@trojantrackstar24 idk i guess it does engage at 4400rpm you just cant really hear it till 6k. and i took a diff route, im rebuilding the motor right now all n/a 12.5-1 comp pistons bord out to a 2.0 darton sleeves block port and polished by DOCS machine in az. so we will see hopefully have vids soon

[mrZdude]

DOHC doesnt ALLOW an engine to spin that fast, a pushrod V8 could spin 8,000RPM, and run at that speed with enough air and fuel.

Vtec doesnt turn any other "camshafts" on, its not a 2nd "DOHC". DOHC is 1 camshaft for the intake valves, and 1 for the exhaust valves. Vtec is simply an extra camshaft lobe which pushes the valves down further and longer after a certain RPM, optimizing low end and high end power.

[Jaran912]

@madracer53 lol.. ur explanation of vtec is wrong kid... nice try

[Redantz864]

that was only 0-99 at 0:19.lol

[madracer54]

@350zspeed i look back on the shit i posted and litterally laughed out loud..but neways i was a dumb teenager and like i said was just going off of what other people told me..my gsr is pushing 220 to the wheels now ill have to upload another video.

[madracer54]

@350zspeed ur the retard..

[madracer54]

@badopinion whats wrong with my spedo? if ur gonna hate save it..

[madracer54]

alright for all of you haters..i dont see why you even waste your time talking shit here to me..i dont really care i have learned a lot since this video was uploaded over 3 years ago..i have fully rebuilt this motor all myself so im pretty sure i understand it mark but thanks for the comment..i was a dumb kid in highschool when i posted what i thought vtec was due to what i was told..so just save it please..new video soon to come

[markhonda1]

@madracer53, learn the basics of a four-cycle engine before you even attempt to understand a twin cam engine or VTEC.

[prosurfer2222]

@calk87 you are an idiot

[badopinion]

Nice speedo..... jackass

[TaffetaEJ6]

@calk87 The speedo is off dude not the tach.

[calk87]

lol your tachometer is so off...1st gear doesnt end at 47mph