Shield metal arc welding (Stick Welding)
Loading...
Uploaded by Eliteweldingsociety on Dec 17, 2010
My name is Wesley this is a vertical up medium bead. I ran it at 84 amps 7018 electrode.
Uploader Comments (Eliteweldingsociety)
All Comments (17)
-
Well this was a year this is my main youtube account that is my weld but i need to make a new video of different size beads and and my do a vee plate
-
Well, as i type this you said you would post a video explaining or showing more of the finished weld bead product. So far, we haven't seen shit. Only thing i saw was a gorilla snot weld. Only good thing in the video kid was that you were playing "Remedy" by "SEETHER.". Now that is kick ass "metal" welding music!!!
-
I always run my root at somewhere around 75 amps with 1/8 6010 and my hot pass and cap at 100 for 7018 1/8. If you keep a tight arc and keep a little motion in the rod the stringer will come out uniform. Sometimes I run my hot pass(es) at 110 amps to tie in a lot better, but it makes the slag hard and is more prone to undercut in the joint. PS your rod angle should be 90 degrees, if its lumpy go 10* uphill or your arc wasnt controlled properly.
-
lol i run mine at lke 120lol and the speed looks little un even
-
run it at 110 AMPS u puzzy!!! LoL
-
rod angle is all wrong.
-
84 amps, what are you a pussy or something.
-
84 amps, that would be a 3/32 rod right?
-
a couple things, your work angle is WAY too acute, your damn rod is almost pointed completely upwards.. your work angle should start out at 90 degrees from the plate and gradually point upwards as you go up. second, a little too much manipulation, you will find that too much manipulation will give you lots of undercut and slag inclusion. third, at the top of the plate you will most likely experience arc blow and will have to counteract it by pointing the electrode in that direction of arc blow
-
yeah I got alot more better at that now I'm doing Vee plate vertical up we need to make some new videos.
10:08
stick welding test part 2by weldingtipsandtricks49,340 views- 6:20
How to stick weld: Flat Lap joint with 7018'sby xivietal666headx21,332 views
- 1:31
A.P.R Welding academy M.I.G verticalby pyschosisxyz10,949 views
- 0:26
7018 vertical puddleby alliedskills32,825 views
- 2:39
Mig Welding Technique Taught by Old Timerby weldingtipsandtricks1,133,541 views
- 6:58
Watch Great Stick Welding on The Welders Lens Home Study Courseby mdtread11,700 views
- 3:17
Overhead V-Groove weldingby stevenjstrate48,020 views
- 1:55
Welding Overheadby kiaa84,910 views
- 6:47
Welding SMAW 6G Positionby pwrtcworld104,966 views
- 7:05
Stick Weld from Welding Home Study Course by The Welders Lensby mdtread111,891 views
- 6:40
7018 Vertical Up Stick Welding Techniqueby ChuckE20095,075 views
- 3:22
A Very Short Welding Lessonby kimchiman1000186,096 views
- 4:44
Watch Great Stick Welding on The Welders Lens Home Study Courseby mdtread21,933 views
- 1:02
Vertical Stick Welding 6010 rodby oMrBaNToNx1,453 views
- 11:11
How to pass the AWS 3G structural steel stick welding test (SMAW vertical Certification)by xivietal666headx19,104 views
- 6:00
Stick welding, I won't weld for the pipeline.by Iliketoweldandbraze2,900 views
- 0:30
Open root pass weld 1/8 6010by alliedskills49,634 views
- 9:58
Arc Welding Tips, Tricks and Techniquesby videomandw653,397 views
- 0:29
4- shielded metal-arc welding( smaw )by pooyandori2,196 views
- 3:37
mig welding technique for uphill welding by weldingtipsandtricksby weldingtipsandtricks72,211 views
Were going to be making more videos soon explaining more and better quality
Eliteweldingsociety 1 year ago
just check out are channel I have a video with the weld cleaned up
Eliteweldingsociety 1 year ago