RB30DET R33 GTS4 Skyline First startup MCR Automotive 0064-9-4443489

Nissan Skyline GTS4 R33 Auto First startup
RB30DET TO4Z Forged pistons "H" beam rods, Greddy cams, Head gasket inlet manifold ECT.
Custom built 300z trans to take four wheel drive unit.
Built for 700hp.
Will update soon

Category:

People & Blogs

Tags:

• RB30DET
• RB30
• TO4Z
• T04Z
• Greddy
• R33
• R32
• Skyline

[MCRAutomotive]

I'm using NREdit

[makdadyblk]

what oil pump is this forged rb25/30det using.?

[MCRAutomotive]

@makdadyblk I'm using a RB25DET oil pump with crank coller

[CHARrrrrrrrr]

are NZ dynos trigger happy or what?

im building an rb30-25 head, mahle pistons, spool rods, king bearings, head stripped mild port/polish, gt35r 1.06r, microtech lt10s etc n all tuners are telling me to expect 500rwhp-550rwhp-one place said 400-420! max

[S13Sldewayz]

@CHARrrrrrrrr I have the same pistons, report back and let me know how the build goes. I'm sourcing my RB30 block now,

[MCRAutomotive]

@S13Sldewayz My pistons are a custom unit from JE pistons would be unlikely you have the same, New engine in a different car My R32 GTS4 is making 317kw at 15 psi again with a To4z, I tried a launch the other day it just spun all four wheels with a 5500rpm dump clutch and full throttle 265/35/18 continentals, i'll need more practice

[MCRAutomotive]

@CHARrrrrrrrr I can only speak for my 4wd dyno it seams to be very repeatable, you will always get different reading from different dyno's, i've found 300kw@wheel is very easy to make from a RB30DET or a RB25DET, but get the correct components and more is not unreasonable

[markbrown06]

Good advertising for your work shop, rb30 specialists and its running like a fiat tractor!

[MCRAutomotive]

Sorry i've not carried with updates, engine was finished and sold (someone with deep pockets turned up and wanted this engine because they could test drive it and see it running. I will have other videos of my other cars soon, I own one R33 GTS4 and two R32 GTS4's all will be RB30DET powered

[Poohkies]

What ecu software are you using?

[nuggz4president]

@MCRAutomotive ok cool i thought forged engines do rattle a bit when its cold had a big argument with a mechanic not to long ago he said if it rattles its built wrong what a wanker

[MCRAutomotive]

@marek0086 RB25DET engines are great and we build allot of them the main advantage with a RB30DET is torque, this will make the cars acceleration faster with the same peak power

[MCRAutomotive]

@nuggz4president Forged pistons do rattle a bit when cold but this is just the lifters pumping up.

[MCRAutomotive]

@HR31PASSAGE Are you talking about base timing or timing under boost?Base timing it set to standard 10degrees, under boost it depends on lots of factors compression ratio, fuel, Turbo, boost pressure ect.

I've had people ask me to tune to 20psi(there turbo can't handle it Timing is set to 5 degrees then backed the boost off to 17 psi and advanced the timing to 12 degrees and made more power, the customer liked the power but didn't have the bragging writes to say he's running 20psi