Kemiko Concrete Floors being Waxed

This is a short video of our contractor doing our concrete floors, this process is the waxing process which is the final part in the concrete staining, this is the clear coat that protects the floors, and you only have to put it on every 1-2 years depending on the traffic in the area, and when you do apply the wax again you don't have to strip them first...they are ideal!

Category:

People & Blogs

Tags:

• Concrete
• Floors
• Kemiko
• Black
• Stain
• Wax

[ikeman37]

i'm getting a job to use one of these....is it easy to use?

[datzfast]

if the streak is just water when the floor dries the streak would dissapear. if the water is dirty then it will streak. if the floor was ground to a high polish do not use wax. the purpose of wax is to fill poors to achieve a polished look but you are really

polishing the wax.

[kcstoneguy]

you need to clean them with a neutral cleaner (ph7) and a microfiber mop.The streaks are from too much water left on the floor.

[blueiz4]

all u would need is a dust mop or use a spray bottle to wet the bottom of a dust broom. is what he tells his customers and it works well

[CRAZYWRKINGMOM]

How does your Father recomend cleaning to his customers? We have high gloss stained floors and everything we use steaks them. I love them but am frustrated. Would you mind asking him?

[blueiz4]

my father dose concrete floors and they last about 20 years with no waxing.

and uses kemiko