HHO 1.07 LPM @ 4.62 MMW (w/Data)
Loading...
Loading...
1,876
Loading...
5:02
Screw Cell - Newest Plate Configurationby lutherp406,423 views- 5:36
Warning about In-Line Flashback Arrestors!!!by lutherp4031,586 views
- 2:02
First Sealed Tank for HHO Testby lutherp404,803 views
- 1:23
End of Trinityby lutherp402,841 views
- 4:57
HHO 1.6LPMby hosnoopy2,869 views
- 1:47
14 LPM hydroxy cell Bob Boyce designby flaviandd61,986 views
- 2:41
30 LPM!! 118 plate Monster Hydrogen cell Back from the dead part5by delvis1157,260 views
- 0:48
HHO over 5 LPM Cold startby sovereignenergy10,698 views
- 5:34
hydrogen Nickel HHO generator MMW test 3by delvis111,800 views
- 9:15
HHO ELECTROLYZER TEST_HYDROGEN CELLby roboregor505 views
- 4:18
012 HHO generator designs for testingby FIZZYH2O69,146 views
- 9:03
(5) 5 cell series designby delvis1181,831 views
- 1:43
Resonant Water Found !! Unlimit HHO !!! Brown's gas 40 LPMby hhofan26976,074 views
- 9:53
Scarecrow does battle with the Generator - Part 2 of 3by SmartScarecrow12,168 views
- 8:55
HHO Hydrogen-Assist #34by mrjamestferguson756 views
- 8:24
#011 hho production covered plates new radiatorby FIZZYH2O6,205 views
- 6:41
12 volts turns water into Hydrogen fuel for driving, cooking and cutting metalby Javadavida109,688 views
- 4:44
#47 1.1 LPM HHO at only 247W or 4.50mmw eff!!!by ZeroFossilFuel10,398 views
- 5:57
#46 HHO zero-cell hits 1.11 LPM!by ZeroFossilFuel16,090 views
Hi, I have to ask to see your cell design. I'm having trouble getting good output from my cell. It's 11 plates from lowes, one pos and neg with 9 neutrals in between. ran it at 22v dc at 3.5 amps, and got 1/4 l per min. I thought I should get more than that! everyone I talk to says to have 2v dc between each plate with .25 watts per square inch of surface area! Can you help me out there?
Cheers
dbrannon79 3 years ago
This one was a commercially built plate system. (basically a Smack's cell knock-off)
Center fed with 2 current paths. Each path had 3 or 4 active gaps (same as the later Smacks cells)
Getting any cell to perform is a careful balance of plate surface area, electrolyte concentration, careful management of current flow and heat management.
lutherp40 2 years ago
amps?
asusreviews 3 years ago
See the link to the PDF data file in the "More Info" section of this video.
I hit 4.6 MMW at 11.35 amps, and again at 18.40 amps.
lutherp40 3 years ago