Microchips Tuning How to Desolder and Solder a DIL 28 pin chip
Loading...
Uploaded by MicrochipsTuning on Dec 11, 2009
This video shows how to desolder a DIL 28 pin eprom chip from the board and solder a socket in place.
From www. microchips-tuning.com
Uploader Comments (MicrochipsTuning)
Top Comments
-
Terrible work! Dirty tip and joints, too much pressure on joint, digging your iron into the joint, that desoldering pump is a toy, prying IC with a screwdriver is very risky etc.
10 months ago 7
-
And i thought i was bad soldering! LMAO
All Comments (19)
-
Lol..good grief,
If you're going to try and dig a hole in the board at least use the right tools. Get a pick and shovel.
-
@OzDelphi Add to that not using the correct tip - a chisel tip would make it a lot faster. I prefer to cover it first with flux from a flux pen - it helps making the solder more fluid.
-
name of the song?
-
If you exchange the eprom anyway just cut the legs off.
-
-
Changed Eprom on a Siemens ECU for the Renault Clio 16v/ Williams. Thanks ;-)
-
perfect tutorial thanks!
- 10 videosYouTube Mix for Enigma
- 2:34
Ways how to remove solderby ChipDipvideo112,450 views
- 4:26
(Re-) Programming ECUs quickly and easily with vFlashby vectorchannel16,991 views
- 3:20
Professional SMT Soldering: Hand Soldering Techniques - Surface Mountby jkgamm041209,041 views
- 1:57
Solder a 100-pin LQFP SMD-ICby WatterottElectronic64,286 views
- 2:47
Ecu flashing [Introduction to chiptuning].by nesmagu15,613 views
- 1:59
SMD Reflow Solderingby halfinchhole142,815 views
- 0:42
How to use desoldering wikby voichemg6,454 views
- 8:24
Hot-Air Soldering of Microchipsby ChipDipvideo31,799 views
- 4:45
Motherboard Testingby QuadroNVS12,381 views
- 1:57
soldering lessonby petestaples35,900 views
- 7:03
The Better You Solder it, the Better It Worksby ChipDipvideo13,155 views
- 2:44
How To Remove Solderby infobulb37,331 views
- 5:36
How to fix / repair an LCD TV set.by chipotletv58,053 views
- 0:53
SMD Chip Desoldering.mpgby vancovideo6,014 views
- 5:12
esküvő 1dvdby dincsiwincsi182,084 views
- 0:37
Professional Surface Mount Soldering - How To: QFP 64 (Drag Solder)by jkgamm04153,242 views
- 2:27
Capacitor Replacement Tutorialby Afrotechmods608,706 views
- 1:38
Desoldering 1by edtforamateurs120,319 views
- 9:59
Soldering 101by allandrick278,077 views
I am using 350-400C on my iron.
MicrochipsTuning 1 year ago