Magnetic gear box 4:1 (work with AC motor)

This is a project that I want to see to you: there is a simple AC motor that runs with a power supply that I convert in AC by passing the rectifier diode, there is the concept of the magnetic gear box that work whit an iron bolt, this is much important for the operation.

Questo è un progetto che volglio farvi vedere: c'è un semplice motore a corrente alternata che funziona con un trasformatore al quale ho aggirato il diodo raddrizzatore, in questo video viene mostrato il concetto del riduttore magnetico con l'ausilio di un bullone di ferro molto importante per il suo funzionamento.

Category:

Science & Technology

Tags:

• riduttore
• magnetico
• puleggia
• wheel
• ruota
• motore
• corrente
• alternata
• fast
• veloce
• avvolgimenti
• bobine
• windings
• spire

[ayusch]

I Have made a similar experiment but have no mov yet. I did not us an iron bold but inverted magnets SNSN with a minimum rotor head cound of 4 for stabel role. works preaty great but im not sure about the transmision capabilities, with heavy load i used 1 N neodimiean magnets

[pirondinimarco]

@ayusch I\m in oliday and than I can not to help you too much, but the essensially of the magnetic exchange is proper the iron bolt, this makes like an interface between the opposite pole attraction, this clean the magetic field from alternations of Nord and South poles.

[ayusch]

@pirondinimarco Your video is quiet self expalainatory the big diference betwean yours and mine is that i use no iron bold to achieve a similar efect i use both forces atraction en repulsion. But i have seen the same setup u use in a diferent place some magnet generator used the same setup as u use in the aniamtion at the end of you video. im also doing some other experiments with magnets. if your interestet about the just contact me. ( Permanent magnet axis levitation with no exteranal in put)

[pirondinimarco]

@ayusch Can I see your prototype if it is ready again? I have undersand that you make but I don't understand how you use repulsion in trasmission, if I see one of your video about this magnetic reduction I can to speak to you about these. So do I work sometyme with magnets but now I'm interested to ferromagnetic curie effect and magnets theyself! Thank you for your comment.

[pirondinimarco]

@ayusch I see that video watch?v=dPv26_g18SM, your prototype is like this? See you

[nashausan]

i don't understand why does it needs a bolt between them.

may you explain me?

[pirondinimarco]

@nashausan The iron bolt between the tho wheels is essential, without this bolt, the magnetic exchange does not happen.

One magnet has one field on north and one field on south; two magnet separated have two field on north and two field on south; when the two magnet are placed near (whit opposite poles) we have one field sum on north and south and one field sum on south and north.

The iron bolt intercedes between the different poles each one, and does the magnetic excahnge whit the other wheel.

[ayusch]

No its not like this will send you a video next time i build one.

[presidentemalefico]

?!?!?!?!?!?!?!??