Chevy K1500 with 400 Small Block TBI

my 1995 Chevy K1500 Cheyenne Extended Cab with a 404ci Small Block Chevy. The engine is a 1974 400 small block out of a chevelle and has been redone by Kriner's Engines in Chambersburg, PA back in sept 2009. -Bored out 0.020 over brings it to 404ci -Comp Cams Xtreme Energy 262 -1989 Z28 Camaro Cast Heads milled down to 74cc, 180cc runners, and 1.94" valves -Comp Cams 1.6 roller rockers -Mahle Flat Top Pistons -9.6:1 Compression ratio -454 Throttle Body -80# injectors -255L fuel pump -Custom made chip from Harris Performance -ProForm "noisy" gear drive -Flowtech Afterburner Long Tube Headers -Magnaflow 3.5" Hi Flow Cat -3.5" Dynomax Bullet -Z28 Camaro Stainless Steel Tips -Custom exhaust by CEB Motors -MSD Distributor -MSD Blaster Coil -MSD 8.5mm Wires hp and torque at crank is 336hp@4,500rpm and 522ft/lbs@2,000rpm I got a TCI Street Fighter 4L60E tranny and TCI Saturday Nite Special Converter on order from TCI and also a set of Edelbrock E-Street Aluminum Heads 70cc, 185cc runners and 2.02"s and an Edelbrock TBI Performer Intake aswell and changing out the rear for a GM 14 Bolt 9.5" with 3.73s on Detroit Locker cant wait have to get some burnout videos on then

Category:

Autos & Vehicles

Tags:

• 400 Small Block
• Chevy K1500 Exhaust
• Chevy K1500 with Cam
• XE 262
• 262 XE

[gearhead2255]

@chevboy94 they sell kits for the conversion, check jegs or summit racing

[chevboy94]

Alright. Im confused. With older motors like let's say a 350. You can take a 70s 80s model 350 and convert it to tbi? What all does it take to do so?

[Truckkin454]

@hattiesburgboys Loud isnt always a good thing XD.... Sounds nice In my opinion.

[hattiesburgboys]

Its only that loud because your in a shed. Mine 50 times louder in a field. Look at my vids

[horuslovesyou]

@alipontiac k is 4x4 and c is 2 wheel drive

[EpiclyAwsomeDude]

Noisy Timing gears and knock sensors dont mix.

[TheLeedleLoo]

@alipontiac C1500 is 2wd k1500 is 4wd

[alipontiac]

what is the diffrent between C1500 & K1500???

[94gmc400]

did you have to do any mods to get this to match up to the 4l60e? i have one sittin in the garage that im buildin to put in my 94 gmc. any help is appreciated

[MrAss707]

@jeepfreak80

TBIchips and,or check out Phoenix Engine builders