H D Cylinder Boring
Loading...
Link to this comment:
Uploader Comments (fiatnutz)
Top Comments
-
So many people sit here and don't even really watch closely......they just assume is wobbles....If you look closely the camera is constantly trying to focus on the rotating block......It is NOT the machine or block itself wobbling, but just the camera constantly refocusing.
1 year ago 9
All Comments (56)
-
your lathe is very good, the lathes at my school are very horrible, you can't get anything perfect with them, but yea they are still good for their age (40-50 years old)
-
hi i'am just wondering once the cylinder has been rebored where do you get the new piston from to fit it, thanks.
-
this video was really boring. think about that one
-
Hi. You remind me my job. It was nearly 8 years ago. It was exactly the same what you do. The same equipment. But, I left 0,07-0,09 mm for the honing. All this process from boring to honing takes 15-35 min. Nice job, but boring for me.
To theyellow240z. All cylinders are centered before boring process.
-
A boring job!
-
Hey John, do you center the cylinders before you take the cuts?!
-
@Mrpsychotehpyro not that comes to mind, but he couldve put the other 2 jug bolts in the jug, torqued them down to engine spec and maybe wrap a large wet cloth around the cyl to help with the chatter
-
Nice!
- 7:371930's Rolls-Royce Cylinder Head Resurfacingby fiatnutz27 views
- 3:34Nissan VQ 37 Block Clearancing for Stroker Cran...by fiatnutz66 views
- 2:00Porsche 911 Cam Bridge Resurface & Oil Gallery ...by fiatnutz1,661 views
- 2:18Factory Surface Finish Vs Costa Mesa R&D.mp4by fiatnutz654 views
- 9:412 stroke Rebuild 670 Rotaxby 1skiinIan91,374 views
- 5:22Making a Worthington X-Series Steel Scuba Cylinderby divesports323,632 views
- 1:41The ultimate seduction: Funny & bizarre slideshowby clickheregr41,579,794 views
- 0:53Pouring aluminum piston into ingotsby aharonstube39,726 views
- 0:28flywheel balancingby turboglenn5716,071 views
- 0:22Block Honingby carpartsmachine53,915 views
- 3:26Homemade .22 Pistolby ChuKoNu147,939 views
- 2:591.4 Machine Tool Basics -- Lathe Controls -- SM...by SmithyCo74,323 views
- 0:41Helle Thorning nøgen på talerstol (hemmeligt klip)by p10trxs0hn2,115,598 views
- 2:27Messageboard Grinderby MrSrslySirius416,268 views
- 1:04Preparaciones de cilindrosby WorldCenterComp15,559 views
- 3:192.3 Machine Tool Basics -- Mill Workholding -- ...by SmithyCo72,906 views
- 1:18ship engineby jgcas29203,867 views
- 1:20mein stage 6 racing stuntby PiaStunt90528,453 views
- 0:39IZH PLANET 3by nieppi40,963 views
when doing that, do you torque them down to engine spec on the jig? and im assuming this isnt your first time, but i noticed you didnt put the other 2 jug bolts in, does it make any real difference? Just curious thanks
Ryknfjor 1 month ago
@Ryknfjor - I get them within .-10" to .015" and then clamp them.
fiatnutz 1 month ago
Why is the Lathe 'back-to-front'?
phranklyn 1 year ago 2
@phranklyn - Its easier to see the cut on the back side...
fiatnutz 1 year ago 8
When the cylinders are honed I put them in my torque plates. I leave about 0,25mm (.010") for finish honing. This is easier then with my KwikWay boring bar, it's too large and cumbersom to bore these cylinders, at the end of the day we both get the same results.
fiatnutz 1 year ago