4.6 2V 150HP Nitrous pass

100% Stock 2v 4.6 Longblock, bolt ons, suspension mods, stock exhaust manifolds and catback. Track wasnt the best..car has ran 12.82 on motor weeks before, was .2 off all night and .1 off of 60's times. Went 11.68@116 with 1.75 60' (same best 60' on motor). Should be able to run 11.40's once track conditions get better...and even faster with a slick..running M/T ET Street Radials.

Category:

Autos & Vehicles

Tags:

• Mustang
• 2V
• 4.6
• Nitrous
• NMRA

[RTRBURN]

Heri2d. 100% stock long block. Valve covers have never been off. Key thing would be suspension. Upper and Lower control arms, AJE K-member w/ coilover, Strange engineering adjustable front struts. Stock springs and shocks out back. I had a ZEX kit, I have used others in the past, but this kit was by far the cleaniest install and easy. Only bolt on mods where a 75 Accufab TB/Plenum combo, Steeda UDP, JLT CAI, SCT Xcal Tuner, Aluminum D.S., Powersteering delete. Car weights 3100 with driver.

[al3id]

great time dude

which is better wet kit or dry?

[RTRBURN]

I prefer a wet kit, it helps with the lean spike.

[RTRBURN]

You just want to make sure you can control the rise and the fall of the front end. Not too fast where it falls back down quickly. It will cause your rear weight to unload off the rear wheels and will cause you to spin. My car made 310 at the flywheel NA, I havent had it dynoed with Nitrous. I would say the 150 wet kit is actually 125fylwheel hp. So roughly 425flywheel hp -17% drivetrain loss= 352rwhp with nitrous @ 3100# w/me. I think mine should run 11.40's with great track condition.

[RTRBURN]

Thanks. Suspension wise, Front AJE k-member, tubular A-arms, Coilovers with Strange struts and 175# spring.

Rear, CHE Performance Upper and Lower Control Arms, stock shocks and springs.

Wheels are Greg Weld Design Dragstars.

[MrDOA313]

i wanna put nos on my 4.6 interceptor motor can ? was the worse case senario

[nickyman1405]

Jiiggggg NIGGGGG

[gtdrummerdude]

116 mph on a 150 shot would be just over 100 mph on motor? Just curious. I am doing 105 mph on motor with a completely stock bodied 1982 fox coupe with a/c, p/s, full interior etc. Just some stock iron GT40Ps with a flat-tappet cam and Performer 289 intake. Put 234/268 to the wheels lol.

[fastrex10]

Wet shot. Nitrous and Fuel coming together rather then just nitrous for a dry shot. Does help out with lean spikes.



[Floordford]

Thats alot of hood for not needing it.

[RoryZ23]

Holy fuckin shit that things fast.

[heri2d]

@RTRBURN awasome gt !!i u must have cams and headts to make that much power on a 2v!!what gears do u have and what brand of nos is the best???thanks in advance!!

[2889joeracer]

whats your altitude at that track? i think that car could be faster with a 150 shot.

[vickhcky69]

nice run