This is a GWS A-10 that has been converted to a pusher-jet, running a Suppo 2212-06 motor. Flaps have also been added. The pilot and builder is Zagi400flyerMN at RCGroups.com Flown on a nice Spring day in Minnesota, 2009.
It is awesome! This plane with a single pusher prop/motor is light weight and so easy and fun to fly. no problems. I have even use an APC 7x5 prop with this 2200kv motor = about 400 watts. it's way over proped, but if you just use it for short bursts you can get unlimited verticle at 3/4 throttle and pull out from a slow fly by real fast. I recommend at least an APC 6x4 prop. if you run the 7x5 you can also fly it very well on 2 cell packs too. I use a 6100rx and a suppo 40a esc.
It is awesome! This plane with a single pusher prop/motor is light weight and so easy and fun to fly. no problems. I have even use an APC 7x5 prop with this 2200kv motor = about 400 watts. it's way over proped, but if you just use it for short bursts you can get unlimited verticle at 3/4 throttle and pull out from a slow fly by real fast. I recommend at least an APC 6x4 prop. if you run the 7x5 you can also fly it very well on 2 cell packs too. I use a 6100rx and a suppo 40a esc.
PositivelyJoe 2 years ago
i just bought the same motor, how does it work? any problems? thanks
lucaspamplonica 2 years ago