Cummins towing the Bobcat

On my way back from a brush hogging job with the S150 and Brush Wolf 600. Total weight of about 10,500. The truck right now only has a S&B Cold Air Intake, 5" M.B.R.P. Exhaust and a Smarty S-03 Programmer. Also I have removed the silencer ring from the turbo. Hopefully very soon I will be getting an AirDog Lift Pump so the injection pump isn't starving for fuel.

Category:

Autos & Vehicles

Tags:

• Dodge
• 5.9
• Liter
• Cummins
• 4x4
• 24
• Valve
• Turbo
• Diesel
• Towing
• Pulling
• Bobcat
• S150
• 150
• Trailer
• Brush
• Hog
• Wolf
• 600
• 6000

[snorkelinatv08]

thats a pretty ass truck if i dont say so myself

[lukebrwntube]

@snorkelinatv08 Thank you sir!

[lukebrwntube]

@MrMarq92 Hmmmm, it's been on level 7 for probably a year and a half now, it was that level I seemed to get the best milage actually.

[lukebrwntube]

@MrMarq92 The tranny is starting to slip from 1st to 2nd and the converter seems a little weak so probably in the market for a new converter and a rebuild here soon. It does not have anything aftermarket inside it. And I will check on the block number.

[MrMarq92]

@lukebrwntube How long have you been driving with it on level 7? Do you mostly use sw7?

[MrMarq92]

@lukebrwntube how is your tranny holding, does it have any aftermarket upgrades? the number of your block is found if you look above the oil pan behind the driver's side wheel.

[lukebrwntube]

@MrMarq92 The smarty was on level 7. As far as the block goes I don't know, would you just have to look at the vin or something?

[MrMarq92]

also do you have a 53 block?

[MrMarq92]

what level was the smarty on?

[lukebrwntube]

@offroadram95 That is kinda a dumb spot to put it if pushing fuel is easier than pulling fuel. When you get the gauges installed and chip on make a vid and put it up!